Brands in Building Envelope & Roofing

Imper-Sol Premium Roof Coatings are a the ultimate fluid applied roof preservation solutions.

DOMALKYD are solventborne alkyd resins, water-reducible alkyds and alkyd dispersions.

Styrene is a solvent, nr and synthetic resins-based adhesive. Adhesive with strong fixing power for all types of materials, including expanded polystyrene.

CLiQFLOW is an rheological additives for non-aqueous systems.

WhisperDri inherently water and oil repellent for molded and die-cut applications.

ARDEX N 23 is a rapid-setting, thin-to-medium-bed mortar that is ideal for interior installations of moisture-sensitive natural stone, marble, granite, porcelain, quarry and ceramic on horizontal or vertical surfaces. Recommended for all tile sizes, including mosaics, ARDEX N 23 is suitable for use over concrete floors with in-floor heating systems. ARDEX N 23 has proprietary ARDEX self-drying technology to prevent staining, discoloration, warping and efflorescence. Easy to mix and apply with excellent bond strength and sag resistance, ARDEX N 23 has an open time of up to 30 minutes and a 60-minute pot life.

VersaFlex VF 30 is a low viscosity, high solids epoxy developed as a penetrating concrete primer for polyurea applications. VF 30 penetrates and strengthens the surface of the concrete, reduces pin-hole formations and provides a chemically reactive surface to accept VersaFlex polyurea systems. Adhesion is increased with the use of VF 30 by up to three times that of unprimed concrete.

True-Bond™ is concrete filler and bonder that will not separate from concrete. Resurfaces chipped and pitted concrete. Resists wear, corrosives, weather, impact. Bonds cracked curbing, masonry, swimming pools. Waterproofs. One application lasts for many years.

Aqua-Gard™ is a clear, water protection product for new and existing above ground concrete and masonry substrates. Unlike regular water repellents, Sansin Aqua-Gard penetrates and bonds to the substrate allowing it to breathe while protecting the concrete and masonry from water and contaminants entering the substrate.

SPECTONITE is a high solids, low VOC, water based acrylic coating for exterior concrete, masonry and stucco. It is available in a wide range of colors and in a smooth or sand textured finish.

At Belzona, our combination of cutting-edge research and development allows us to develop the latest in polymer systems. Alongside the unrivaled experience of our people, we can meet the ever-changing and challenging demands of industry.

SpaceRite® a special purpose white hydrated alumina. White hydrated alumina is aluminum trihydroxide, Al(OH)3, that is produced through special processing of aluminous feedstock and stringent process control systems. The result is hydrated alumina unequaled in purity and whiteness. Although hydrated alumina is a dry powder, when heated above approximately 220ºC it decomposes in approximately 35% water and 65% alumina by weight.SpaceRite can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.

A rapid-setting, Portland cement-based, polymer-modified mortar with MICROTEC® and self-drying technologies, ARDEX X 32™ MICROTEC® Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar is ideal for moisture-sensitive natural stone, marble and granite installations. It will not contribute to staining, discoloration or warping of natural stone tiles. ARDEX X 32 can be used as a thin to thick bed up to 1 1/4” (31.8 mm) thick and is excellent for use with agglomerate and ungauged stones that require various mortar depths. Even at a 1 1/4” (31.8 mm) thickness, ARDEX X 32 is ready for grout in just 3 hours, making it ideal for same day interior or exterior fast track installations. ARDEX X 32 can be used over exterior concrete and masonry surfaces and over common interior substrates, including concrete, masonry and exterior-grade plywood.

Premier Rubber Membrane® system is a modified asphalt emulsion system using exact formulated polymers providing unique elastomeric performance. This product is engineered to achieve a seamless monolithic membrane that will bond 100% to most construction materials.

Lupasol® performance polymers are water soluble polymers. They are either homopolymers or copolymers of various polymers. Depending on their structure such polymers are anionic, nonionic, or cationic charged. They act mainly as additional additive due to their key performance. Lupasol® paper chemicals are components for the production of microcapsules which, in combination with other chemicals, give a highly efficient reactive system to produce carbonless copy papers.

CP-500W is a one component, VOC compliant, penetrating water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates most masonry and concrete pores and capillaries up to ¼ inch or more depending on surface porosity and moisture content at the time of application. CP-500W reacts with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow CP-500W to become integral part of the substrate and provide long-term water repellent protection.

SurfaceChoice® Printed Films help you make a dramatic impact in any environment.

The VINNAPAS® eco product line stands for polymer dispersions, dispersible polymer powders and solid resins derived from renewable raw materials via the biomass balance approach. VINNAPAS® eco grades are chemically identical to the corresponding basic VINNAPAS® products. VINNAPAS® eco dispersions, dispersible polymer powders and solid resins are manufactured using the biomass balance approach. This means that fossil raw materials are entirely replaced in the supply chain by renewable raw materials that are certified as sustainable. WACKER uses bio-based acetic acid that is a byproduct of the wood-processing industry and is certified as sustainable by PEFC® (Program for the Endorsement of Forest Certification). The bio-based acetic acid is introduced at the beginning of the production cycle. The biomass balance approach mathematically determines the percentage of dispersions, dispersible polymer powders and solid resins made from renewable (non-fossil) raw materials. VINNAPAS® eco grades are certified to the REDcert2 standard and audited by TÜV NORD, an independent German technical inspectorate.

Crystal Clear is a clear, acrylic coating, available in many formulations to achieve a variety of “wet looks” and sheens. All formulas will highlight and darken the natural appearance of the stones or masonry surface.

ECONYL® colorants are highly concentrated binder and solvent free ready to use water based pigment dispersions. The high tinting strength, VOC and APEO free colorants are recommended for in-plant tinting of various water and solvent based systems. Maximum stability and dispersability is guaranteed due to a patented wetting and dispersing agent platform.