Products results

MOCOM Compounds ALTECH® PA6 A 2035/109 GF35 is a polyamide 6 based polymer with a 35% glass fiber filler/additive system that is heat stabilized, easy to release (demold) and processing stabilized. Common market segments utilizing this material include automotive, electrical and electronic, and building and construction. Typical applications include functional components, automotive powertrain parts, fans, housings, and electrical components.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2020 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2020 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1010 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1010 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® PTFE G201C is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® PTFE CD086E is a white free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. This polymer has a trace quantity of comonomer incorporated in the molecule to modify its crystallinity and the resulting properties. The process of making Fluon® PTFE CD086E does not use ammonium salts of perfluorooctanoic acid (PFOA).

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-1120 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-1120 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2220 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2220 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE AH-3000L is a semiconductive, modified copolymer of ethylene and tetrafluoroethylene. It is used in applications where superior stress-cracking properties and strong adhesion to polyamide polymers, especially nylon 12, are required. This product also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® HR-907 Heat Resistant LM-ETFE is a specially designed low-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® PTFE G201 is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

AGC Chemicals Americas, Inc. Fluon® HR-930 Heat Resistant LM-ETFE is a specially designed high-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

Fluorescent dye for NTD applications

Fluorescent dye for NTD applications

Easy Splice 0.335″ +/- 0.014″ (8.5 +/- 0.37 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

90 durometer black Viton A fluoroelastomer metal bonding compound

savE® FS21R is form stable phase change material, liquid PCM embedded in polymer matrix.

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 0.375" +/- 0.014" (9.5 +/- 0.38 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

savE® OM29 is an inorganic phase change material.

NITRILATEX® Vinylpyridine Latex (PSBR) LVP-106 by Valex Group is commonly used as Adhesion Promoter for a variety of applications.

Easy Splice 0.098″ +/- 0.008″ (2.5 +/- 0.22 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 0.472″ +/- 0.026″ (12 +/- 0.68 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 0.472″ +/- 0.023″ (12 +/- 0.68 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

75 Durometer - Black Viton GF-S O-Ring Cord