Brands results

Discover range of PEI resins - ULTEM™ resins – amorphous, transparent, polyetherimide starting with ULTEM™ 1000 unreinforced PEI resins, high-performance base material for blends, reinforced grades, offering: long-term high heat capability, dimensional stability, strength and modulus, inherent low FST, non-halogenated FR solution, hydrolytic and chemical stability, IR transparency, stable dielectric properties, lightweight, colorability. ULTEM™ HU1004 resin, PEI resin blend, healthcare grade well suited for strong, durable medical devices that withstand multiple sterilization methods, offer enhanced hydrolytic stability in steam autoclave sterilization. ULTEM™ 9085 resin, a PEI resin blend, offers robust OSU/FST properties, meets FAA requirements, and may be used in impact-resistant aerospace interior parts, ground transport applications, pellet-fed additive manufacturing/3D printing. ULTEM™ 2300, reinforced PEI resin, with CTE close to metal, well suited for fiber optic and electrical connectors, bracketry in aerospace and automotive, enable complex designs and simplification of assembly. ULTEM™ 3473, reinforced PEI resin, 40% lighter than aluminum and may support integrated antenna filter units (AFUs) including radiofrequency (RF) filters thanks to low CTE, Surface Mount Technology (SMT) process compatibility, excellent surface metallization performance.

Due to its good thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of engineering plastics. In addition to its high strength, hardness and toughness, it has a high heat deflection temperature of -40 °C to approx. +100 °C. However, the good damping capacity can only be achieved after conditioning, so this material should be re-conditioned after tempering. The material also has good sliding and dry-running properties. Due to the increased moisture absorption behavior in comparison to other polymer materials, possible dimensional changes as well as changes in the mechanical and electrical properties must be taken into account prior to material configuration.

HALOX® Corrosion Inhibitors are effective against flash rusting and in-can corrosion, though the benefits of using these products does not end there. Our HALOX® Corrosion Inhibitors are ideally suited for high gloss, thin film, and clear coat applications. They also provide superior synergy when used in combination with inorganic corrosion inhibitors in traditional coatings. To achieve desired performance of your resin system proper selection of HALOX® Inhibitors is essential.

Accofal 2G54 is a thermoplastic fluoropolymer coating with excellent low friction and non-stick properties.

Chemaprint is used for rheology control in print pastes used for digital printing on carpets, carpet tiles and mats.

Life-Kote is our Super Compliant Industrial Line. This series contains a complete offering of coatings designed for use on waste handling equipment, trailer components, structural steel, utility & power equipment, heavy machinery, propane tanks, automotive parts and by manufacturers using our pharmaceutical approach to innovative coating solutions.

Exact-O-Board® is a rugged, board-type fiberglass insulation specifically designed for use in air conditioning units and other air handling equipment applications. It is also suitable for other equipment applications requiring strength and durability, high thermal and acoustical values, space adaptability and attractive appearance.

CATALOX is the trademark for the aluminium oxides derived from the controlled activation of CATAPAL high-purity alumina hydrates. CATAPAL are the respectiv trademarks of synthetic, high-purity boehmite (AlOOH) and bayerite (Al(OH)3), manufactured in Brunsbüttel, Germany, and Lake Charles, USA. The proprietary process used in the preparation of these high-purity aluminium oxides allows Sasol to control many important physical properties and hence "tailor-make" a product for your needs. CATALOX are available as white, free flowing powders with high-purity and consistency. Due to the precisely controlled processing conditions during and after manufacturing these aluminium oxides, CATALOX make excellent starting materials for the catalyst industry. They provide excellent specific catalytic activities, high surface area stability and low attrition loss. CATALOX are arguably the best starting materials for the catalyst industry where consistency and an stable nature of the support is highly desired. These characteristics are of great importance for fluid and slurry bed applications. Due to their high thermal stability, CATALOX are widely used raw materials for wash coat formulations in environmental emission-control catalysts. Recent developments have found other suitable uses for these materials in applications outside catalysis such as polishing, chromatography, adsorbents and gas separation.

Scott Bader’s Texipol® range of rheology modifiers can be used in a variety of water-based formulations.A diverse range of thickeners and binders for the Artist Colors market.Texicryl® and Texipol® emulsions to enhance the workability and technical performance of products being supplied into the building and decoration market.With over 60 years’ experience, our range of PVA / acrylic binders and inverse emulsion thickeners deliver high performance in textile and furnishing products.

The Naxan® anionic surfactants are a series of sodium salts of alkyl naphthalene sulfonic acid. These products provide excellent wetting, dispersing, hydrotroping and medium to low foaming. They offer acid and base stability, hard-water tolerance and high temperature stability. The naxaf® naphthalene sulfonate–formaldehyde condensates are used primarily as dispersants in a wide variety of industrial applications.

Stearocling Way Oils are formulated for the sliding ways of machine tools. They are formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

Lutensol® grades are nonionic surfactants used as wetting agents and low foaming surfactants, emulsifiers.

MC1210® Heavy Grease is an NLGI “Grade 2,” lithium-based, extreme duty grease that is impervious to water and corrosion and has ideal viscosity and durability for parts under heavy pressure and under high load or stress. MC1210® contains Mil-Comm’s legendary TW25B® lubricant as a core product component. It delivers outstanding performance for extreme pressure and heavy load-carrying machines or equipment. Its anti-wear and anti-corrosion properties have also qualified MC1210® for use aboard U.S. Navy warships. Our heavy duty lubricant extends the life of parts and reduces the frequency of necessary maintenance. Parts run smoother and last longer in the harshest operating conditions

We deal with Tackifiers based on Rosin, Rosin Derivatives and Petroleum Resins.

Knock Out White™ Low Bleed - 7007 is a low bleed, high pigment, fast flashing, low tack, non-phthalate plastisol screen printing ink.

IrisECO is our series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

ForTii® has unique PPA technology with high amide density. The ForTii® platform includes polymers that are the highest crystalline, highest melting point and highest glass transition temperature among all PPA resulting in: Best part mechanics <160°C Highest peak temperature performance High chemical resistance

QUAB® Cationizing Reagents, manufactured to precise specifications and certified for consistent quality, react readily with a variety of natural and synthetic substrates. They provide a broad range of industries an opportunity to improve upon the quality or performance of products.

Traction Motor TM-10™ is maximum-duty, metal-conditioning lubricant for adding to traction motor gear cases that need extra protection from extreme pressure. It increases gear service life while cooling the overall system. TM-10™ polishes, seals and protects the gear metal from wear and damage caused by extreme pressure and friction-related heat.

GreenTEC Pro Carbon is a biopolymer made from renewable resources with10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance. In addition, the raw material is approved according to the REACH- and RoHS-Standards.