Products results

ELAPOL 5520 C by Elachem is an aliphatic, saturated polyester polyol. It contains 1,4-butanediol and mono-ethylene glycol.

MERACRYL™ MAAmide can be used as a polar co-monomer with a high Tg for improving solvent resistance and cohesion. For specific applications, methacrylamide can be grafted onto natural fibers (e.g. silk weighting).

PL-3209 is a difunctional monomer providing a good balance of hydrophobicity and hydrophilicity.

Bisomer® PEM63P HD is a hydroxyl functional methacrylate monomer.

PL-3201 Polyethylene Glycol 200 Dimethacrylate is dimethacrylate difunctional monomer. It's used in 3D printing,Adhesives and Sealants applications. It provides excellent adhesion, flexibility and impact strength.

PHOTOMER® 4072 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and high crosslinking reactivity. It exhibits less shrinkage and better adhesion to a variety of substrates versus typical first generation crosslinkers, and is recommended as a direct replacement for TMPTA and EOTMPTA in many UV/EB curable applications.

ELAPOL 5520 A by Elachem is an aliphatic, saturated polyester polyol. It contains 1,4-butanediol and mono-ethylene glycol (BDO,MEG).

MM-290 is a liquid mono-functional acrylate monomer. It has similar properties as Isobornyl Acrylate (IBOA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-290 has good resistance to hydrolysis.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

UVP 0204, Neo-­Pentyl Glycol diacrylate (NPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It has good chemical resistence and high reactivity .It is compatible with a wide range of acrylated resins.

PL-3208 Ethoxylated Bisphenol A Dimathacrylate is a difunctional monomer providing low volatility and flexibility.

PL-3102 is a monofuctional monomer that provides water resistance and flexibility.

PL-3214B is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

Photomer® 4061 TF is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are pliable, hard and glossy.

Bisomer® PPM5 LI is a hydroxyl functional methacrylate monomer.

PHOTOMER® 4226 TF (DPGDA)is a toluene free aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

Guangzhou Chemical HPMA(2-Hydroxy Propyl Methacrylate) is mainly used for hot curing acrylic coating, UV-curable acrylic materials, photosensitive coating, water soluble plating coating, adhesive, textile treatment agent, ester polymer, modifier polymer, and stem acid water reducing agent, etc.

Photomer® 4061 (TPGDA) is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are flexible, hard and glossy. Photomer® 4061 exhibits good solvency and viscosity reducing characteristics with typical radiation curable oligomers and prepolymers.

PL-3204 is a difunctional monomer providing flexibility and hydrophobicity.

PHOTOMER 4307 is a high boiling point monomeric liquid with a relative low viscosity. PHOTOMER 4307 is a tetra functional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization.

Purol® R-06 has Phthalic Andydride base used as adhesives, PUR hot melts, PU coatings, PU rigid foam, Elastomers.

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Photomer® 4172 (PPTTA) is a low odor aliphatic tetra functional acrylate of low viscosity and excellent crosslinking reactivity with very low levels of toluene.

PL-3301 Trimethylolpropane Triacrylate is a trifunctional monomer that provides harness and cure speed with low irritation.

PL-3218 is a difunctional monomer providing low viscosity and high boiling point.

Photomer® 4039 is a monofunctional aromatic acrylate of low viscosity, low odor, moderate cure speed and classified as a mild skin irritant. Due to modification of its aromatic backbone, it has been found useful as a flexibilizer and is suggested for UV curable litho, screen and flexographic inks, clear litho coatings, and lacquers.

PHOTOMER® 4306 is a high boiling point monomeric liquid with a relative low viscosity. PHOTOMER® 4306 is a tetra functional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization.

Bisomer® TEGDMA (Triethyleneglycol Dimethacrylate).

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

PHOTOMER® 2050 is a di functional methacrylated monomer with low skin irritation and with good flexibility and chemical resistance

MPD Industries UVP 0202 99 is a Di functional monomers, which polymerize when expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer. It is a fast curing monomer with low valatility & a hydrophobic backbone.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PHOTOMER® 4666 is a mixture of penta-acrylate and hexa-acrylate monomer.

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

UVP 0101 99 is a clear liquid with low viscosity and good solvency.