Products results

China Jinan Taixing Fine Chemical high purity Zinc borate 2335 is a multi-functional synergistic additive with antimony oxide or other halogenated flame retardants to significantly improve the flame retardant performance.

Glyptal® 9620 INSULATING VARNISH is a clear air-drying , insulating, and finishing varnish designed for applications where oil, moisture, and acid-resistant coatings are desired. This fast-drying, synthetic-resin-type varnish is often used as a final coat over other varnishes, giving a hard, glossy protective coating. Glyptal® 9620 Varnish has excellent heat resistance and will operate as a finish coat at temperatures up to 130ºC on an apparatus that is not flexed. Although primarily an airdrying varnish, the oil, moisture, acid, and salt water resistance are greatly improved by baking. Glyptal® 9620 has excellent adhesion to most materials. It has excellent dip tank stability where the proper thinners are used.

Johoku Chemical JP-310 is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Neelanjana Polymers Green-7 Pigments has appropriate composition, color consistency as well as color fastness.

Polyimide /PI Glide™ Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides typically do not melt before decomposing; thus, they demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. Zeus polyimide tubing is also available in a layered or composite construction using a combination of PI and PI Glide™ to suit a variety of tubing requirements. Mechanical properties, lubricious surface, and many other tubing properties can be tailored in this way. Choosing Zeus PI and PI Glide™ tubing for your catheter construction needs allows users to consolidate their components with a single best-in-class supplier.

Hsin Sou Chemical HSINSOU ET-HIPS is a permanent anti-static HIPS resin .not only the anti-static property but also able to keep the basic mechanical properties of each original HIPS resin.

Mercury cadmium telluride is Vital Materials produces Tellurium in various shapes and sizes, from powder to pellets to metal/metalloid ingots and a wide range of purity from 99.5% to 99.999%. Vital Materials is also a producer of chemicals and compounds derived from tellurium such as tellurium dioxide for industrial applications and other specialty products such as cadmium telluride and telluric acid. Vital Materials’ products can be tailor-made to customer specifications.

The Mepco Powder Company SS-60 is aluminum powder which is corn flake in shape, for the applications like Chrome finish decorative dustings and coatings, Plastic coatings, Plastic master batches, Powder coatings, Screen printings, Textile coatings etc.

d2p® Flame Retardant decrease the ignitability of materials and inhibit the combustion process, limiting the amount of heat released.

Cridel ER358/EH438 is an epoxy-based potting compound used in the electrical and electronics industries.

LESTAC TR100 is terprene resin, also known as polyterprene resin,a pale yellow granular thermoplastic resin obtained from mainly terprene feedstocks either from wood sources or from citrus fruits, by the use of turpentine and α pinene and β pinene, in the role of aluminum trichloride catalyst. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

Topolymer® 9210-801NA/BL is a heat-stabilized PP/EPDM based Thermoplastic Vulcanizate (TPV) in the family of Thermoplastic Elastomer (TPE). This material is designed for a wide range of applications such as automotive interiors and exteriors, construction seals, gaskets, electricals, consumer products or other parts where softness and conformity are needed. This grade can be processed on conventional thermoplastics processing equipments for Injection Molding, Extrusion and Blow Molding or other hot melt processes. It is completely recyclable.

ULTRA-PLAST™ TPO6 is predominantly used as a slip agent in PE-films. This is due to migration and formation of a microscopic coating on the film surface. It migrates slower than ULTRA-PLAST™ TP05 but has a better heat stability. ULTRA-PLAST™ TP06 improves mold release and surface finish. It also functions as a dispersant in concentrates which leads to easier let-down of the concentrates. ULTRA-PLAST™ TP06 is sanctioned for use by the FDA (Food and Drug Administration) in a number of applications listed in the sections of Title 21 of the Code of Federal Regulations.

Titacon® EX910 is a INJECTION MOLDING GRADE, PERMANENT ANTI-STATIC, CARBON BLACK.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

AH255 is a Coarse Ground ATH is used in Composites.

Oxford Polymers PC 68 is an unfilled polycarbonate for injection molding and extrusion molding.

Armlen PP MD 50-2TS is a 50% mineral filled thermostabilized material, compliant with Europesecurity requirements. Designed for molding of bodywork for electrical and general goods. Available in white and gray colors.

ThreeBond Europe SAS TB3301 is an electro conductive adhesive of single fluid, thermosetting type, characterized by quick hardening at elevated temperature. In contrast to solder, strong adhesion is provided for plastic, rubber and ceramic. Applicable to bonding of lead wire to electrodes.

ANSALENE PP AT A02 000 0000 AT is Polypropylene Homopolymer with anti-static property for injection molding.

Navajo Brand® FFF pumice products are available in particle size distributions ranging from 6-mesh to 5 microns. Their high brightness, purity, and low specific gravity offer formulators unique opportunities for superior performance.

PEROXAN MI-60 KPX + is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX+ is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 150°C.

CompaDur® 121 GF 20 (004) is a PBT, injection molding grade, non-reinforced, high viscosity, easy release.

Aronkasei AR-720 is styrene type elastomer AR.

BNX 245 (36443-68-2)is a partially-hindered phenolic antioxidant that provides excellent processing and long term thermal stability in a wide range of plastics and other materials.

BIONOX® 1010 - a sterically hindered phenolic antioxidant, is a highly effective, non discoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils and fats.

CLI4161 is a solventless, low viscosity, two component, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. This product is especially suitable for encapsulating low and middle voltage power and instrument transformers where cushioning of the core is not practical. The cured product has excellent thermal shock resistance.

AMOSIL® is a fused silica which is the amorphous modification of high purity silica. It is artificially produced using an electric arc at 2,000°C. The main feature of fused silica is an extremely low coefficient of thermal expansion (0.5*10-6/K). Therefore these products are particularly suitable for special applications with alternating temperature loading. Through special iron free grinding and subsequent air separation we are able to offer grain size distributions down to submicrons. In addition to our standard products we offer a special grain size optimized grade as well.

BIONOX® 1098 - a sterically hindered phenolic antioxidant, is an efficient, non-discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is particularly effective in polyamide polymers and fibers.

China Jinan Taixing Fine Chemical Zinc borate 3.5 water is used in plastic, rubber, coating and pain.

Fiexiso® FI 13014 is a milky, turbid, highly rugged polyester film. This film has good machine running properties, high dimensional stability and good flatness.

MICAM’s FR-4 flame retardant epoxy-glass copper clad laminate offering excellent mechanical and electrical performance