Building & Construction
Huber Engineered Materials
MoldX® S45
Function: Flame Retardant
Chemical Family: Aluminum Compounds
Flame Rating: UL 94 5VA, UL 94 V0
MoldX® S45 is engineered to allow higher loadings versus standard alumina trihydrate (ATH) products and offers excellent processing from 180 phr to as high as 240 phr.
United Initiators
CUROX® M-200
Chemical Name: 2-Butanone peroxide
Function: Curing, Crosslinking & Hardening Agent, Initiator
CAS Number: 1338-23-4
Chemical Family: Peroxides
Compatible Polymers & Resins: Vinyl Esters, Polyesters
Processing Methods: Spray Lay-up, Hand Lay-up, Filament Winding, Centrifugal Casting
Synonyms: Methyl Ethyl Ketone Hydroperoxide, Butan-2-one Peroxide, Mek Peroxide, Ethyl Methyl Ketone Peroxide, Methyl Ethyl Ketone Peroxide
CUROX® M-200 is a colorless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitized with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins.
Precision Polymer Engineering
Precision Polymer™ Z85L
Polymer Name: Acrylonitrile Butadiene Rubber (NBR)
End Uses: Pump Parts, Valve Parts, Seals, O Rings, Oil/Gas Applications, Valves
Features: Chemical Resistant, Abrasion Resistant, Low Temperature Resistant, High Strength, Wear Resistant
Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps
Berolan Vertriebsges
Berolan LP 70
Function: Foaming Agent, Plasticizer
End Uses: Electronics
Berolan LP 70 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on cement, gypsum or lime. It leads to a better plaster yield, to improved workability and improves the wetting of the mortar. Related to the longer open timea tearing of the plaster surface and skin formation will be reduced. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized. CE-Nr.: 1139-CPD-0802/09
Ceronas
mju:wax® 2400
Function: Surface Modifier, Flattener
Chemical Family: Waxes
End Uses: Powder Coating, Lacquers
Features: Blocking Resistance, Excellent Scratch Resistance, Abrasion Resistance
mju:wax® 2400 is a micronised amide wax compound and used as an additive in lacquers, coatings and printing inks to modify the surface properties. mju:wax®2400 improves scratch resistance and anti-blocking properties. Used as additive in wood lacquers mju:wax®2400 acts as matting agent and sanding aid. In powder coating applications mju:wax®2400 improves in several systems the de-airing properties.
Versalis - A subsidiary of Eni S.p.A
Riblene® FF 39 F
Polymer Name: Low Density Polyethylene (LDPE)
Processing Methods: Blown Film Extrusion
Melt Flow Index: 0.8 - 0.8 g/10 min
Riblene® FF 39 F is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 39 F is characterized by a good melt strength leading to a good bubble stability during extrusion.Films manufactured by Riblene FF 39 F are easily heat shrinkable and characterized by good optical and mechanical properties.Main ApplicationRiblene FF 39 F is recommended for the production of shrink film for medium and light loads, for lamination film and for blend.
TBF Environmental Technology Inc.
KradaSol™
Labeling Claims: Recyclable, Low VOC, Environmentally Friendly, Other Labeling Claims, Non-Carcinogenic, VOC-free, Benzene-free, HAPs-free
Purity (Assay): 99.5 - 99.5 %
Features: Low Toxicity
KradaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Hexane, Xylene, Cyclohexane, Toluene and Perchloroethylene.
Munzing
TAFIGEL® PUR 40
Function: Rheology Modifier, Thickener
Chemical Family: Bentonite, Urethanes, Polyurethanes (PU)
End Uses: Waterborne Coating, Waterborne Adhesive, Waterborne Ink
Labeling Claims: Low VOC
Physical Form: Dispersion, Liquid
ONLY AVAILABLE OUTSIDE EUROPEAN UNION! TAFIGEL PUR 40 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 40 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 40 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
D&R Dispersions and Resins
Akryvil® WSA 4612
Chemical Family: Styrene-Acrylic Copolymer
End Uses: Building Materials, Primer
Glass Transition Temperature (Tg): 2.0 - 4.0 °C
Akryvil® WSA 4612 is a Styrene-acrylic dispersion used for Decorative, Primer Interior and Exterior paints. It has dispersions of acrylic, styrene acrylic and vinyl acrylic copolymers are high-quality products. Their production process is based on various parameters such as dry matter content, viscosity, average particle size, vitrification temperature or minimum film formation temperature. This allows us to supply raw materials perfectly adapted to the needs and expectations.
Incorez Ltd
Aldirez A
Function: Curing Agent
End Uses: 2K (2 component) Coating, Primer
Compatible Polymers & Resins: Polyurethanes (PU), Other Compatible Resins
Features: Low Viscosity, Low Temperature-Curing
Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.
Avtec Industries
FR Eco-Additive™ 20
Function: Flame Retardant, Smoke Suppressant
Processing Methods: Thermoforming, Injection Molding
FR Eco-Additive™ 20 is Bromine, antimony, and magnesium free fire retardant and smoke suppressing, polymeric additive. Provides an effective thermal barrier upon exposure to open flame or high radiant heat. This additive is a mixture comprised of TSWB™ and crystalline graphite.
Velsicol
Velsiflex® 342
Function: Plasticizer
Chemical Family: Benzoates, Diols, Carboxylic Acids & Derivatives, Glycols
End Uses: Plastisol Adhesive, Powder Coating, Gravure Ink, Lacquers
Compatible Polymers & Resins: Polyurethanes (PU)
Labeling Claims: Phthalates-free, Environmentally Friendly
Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.
Braskem North America
UTEC® 3040
Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods: Compression Molding, Ram Extrusion
UTEC® 3040 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction what makes it a self-lubricating material.
Braskem North America
UTEC® 3041
Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods: Compression Molding, Ram Extrusion
UTEC® 3041 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction what makes it a self-lubricating material.
VYNOVA
VYNOVA™ S6830
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Extrusion
End Uses: Fittings, Conduit, Pipes, Construction Applications, Cup Holders
VYNOVA™ S6830 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.
Perstorp AB
Boltorn™ U3000
Function: Anti-Blocking Agent
Chemical Family: Dendritic Polymers
Labeling Claims: Low VOC
Features: Air Drying, Low Viscosity, Outdoor Durability
End Uses: Waterborne Coating
Boltorn™ U3000 is a fully fatty acid-modified dendritic polymer with a high concentration of unsaturation. It is used in wood stains and alkyd paints for outdoor applications. Features Branched structure provides unique flow properties Low VOC Low viscosity Dries rapidly Outdoor durability
DuPont
TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1170.0 - 1170.0 kg/m³
Tear Strength: 41.0 - 41.0 kN/m
TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Zytel® FN727 NC010A
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Blow Molding, Injection Molding, Extrusion, Film Extrusion, Coating
Flexural Modulus: 900.0 - 900.0 MPa
Zytel® FN727 NC010A is an impact modified, plasticizer free, very flexible polyamide 6 alloy resin having good low temperature toughness, good heat aging and good chemical resistance. Uses include cable jacketing, hose and tube applications.
DuPont
Zytel® HTNFE8200 NC010
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Zytel® HTNFE8200 NC010 is an unreinforced, toughened, heat stabilized high performance polyamide resin for injection molding. It is also a PPA resin.
DuPont
Zytel® 7331J NC010
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding
Flexural Modulus: 2600.0 - 2600.0 MPa
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be colored. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry. Zytel® 7331J is an unreinforced polyamide 6.
DuPont
Crastin® SK605 BK851
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion
Fillers Included: Glass Fiber
Additives Included: Hydrolysis Stabilizer
Flexural Modulus: 9000.0 - 9000.0 MPa
Crastin® SK605 BK851 is a 30% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.
Atmos Technologies
Vycel U
Chemical Name: Benzene, 1,4-Dimethyl-, Manuf. Of, By-Products From, C11-22-Distn. Residues
Function: Active Diluent, Rheology Modifier
CAS Number: 147952-37-2
Chemical Family: Hydrocarbons
Compatible Polymers & Resins: Polyurethanes (PU)
Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.
AB Specialty Silicones
Andisil® OH 50,000
Function: Adhesion Promoter, Anti-Structuring Agent, Coupling Agent
Chemical Family: Silicones, Silicon-based Compounds
Labeling Claims: Plasticizer-free, Additive-free
Features: Good Stability, Excellent Stability
Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.
AB Specialty Silicones
Andisil® TL 28
Chemical Name: Dimethylbis[(1-oxoneodecyl)oxy]stannane
Function: Stabilizer, Light Stabilizer, Catalyst, Heat Stabilizer
CAS Number: 68928-76-7
Chemical Family: Tin Compounds, Laureth Compounds
Compatible Polymers & Resins: Silicones, Phenolic Resins, Polyamides, Polyurethanes (PU)
Synonyms: Dimethyldineodecanoatetin, Dimethyltin Dineodecanoate
Andisil® TL 28 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.
AB Specialty Silicones
Andisil® 1120 Silane
Function: Coupling Agent, Adhesion Promoter
Chemical Family: Silanes
Compatible Polymers & Resins: Polyethers, Isoprene Rubber (IR), Silicones, Polycarbonates (PC), Polyethylenes (PE), Polyvinyl Chloride (PVC), Polyamides, Acrylics, Melamines & Melamine Formaldehydes (MF), Polyureas, Polypropylenes (PP), Chloroprene Rubber (CR), Phenolic Resins, Polyurethanes (PU), Nitrocellulose, Epoxies (EP), Styrene Butadiene Rubber (SBR), Urea Formaldehyde (UF), Nitrile Butadiene Rubber (NBR), Cellulose & Cellulosics, Polysulfone (PSU), Polystyrenes (PS), Polyesters
Aminoethylaminopropyltrimethoxysilane (technical grade). Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.
allnex
SETALUX® D A 365 BA/X
Chemical Family: Acrylic Polyols, Acrylics & Acrylates
End Uses: Solventless & High Solids Coating, Solventborne Coating, 2K (2 component) Coating, 1K (1 component) Coating
Compatible Substrates & Surfaces: Wood, Metal
Features: Improved Flexibility, Improved Hardness, High Gloss, Improved Chemical Resistance, Outdoor Durability
SETALUX® D A 365 BA/X is an acrylic polyol with 4.5 % OH (calculated on non-volatiles). High hardness and thoughness with good flexibility, high gloss and body, excellent weather stability and lightfastness, good resistance to solvents and petrol.
allnex
BECKOPOX™ EP 117
Chemical Family: Epoxy & Epoxy Derivatives
End Uses: Epoxy Coating, Solventborne Coating
Compatible Substrates & Surfaces: Metal
Features: Improved Mechanical Resistance, Improved Chemical Resistance
BECKOPOX™ EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds.
allnex
MODAFLOW® AQ 3025
Function: Leveling Agent, Flow Promoter
End Uses: Radiation Curable Coating, Clearcoat, Screen Printing Ink, Inkjet Ink, Waterborne Coating, Varnishes, Flexography Ink, Gravure Ink, Lithographic Ink
Labeling Claims: VOC-free, APEO-free, Tin-free
Features: Improved Rheology, Improved Substrate Wetting, Low Migration, Low Odor, High Gloss, Reduced Surface Preparation
Modaflow® AQ 3025 is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries.
allnex
ADDITOL® XW 6533
Function: Drying Agent
End Uses: Primer, Top Coat, Waterborne Coating
Labeling Claims: Tin-free, APEO-free, Cobalt-free
Features: Improved Water Spotting, Improved Hardness, Corrosion Resistance, Faster Cycle Time, Low Temperature-Curing, Outdoor Durability, Improved Water Immersion
Additol® XW 6533 is a cobalt-free combination drier, water-emulsifiable. It contains a balanced metal combination which is necessary for an optimum oxidative drying. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints.
allnex
ADDITOL® VXW 6206
Function: Drying Agent
End Uses: Waterborne Coating
Labeling Claims: Monomer-free, Formaldehyde-free, NMP-free, Tin-free
Features: Faster Cycle Time, High Reactivity, Improved Hardness
ADDITOL® VXW 6206 is an emulsified, nonylphenylethoxylate free combination drier of cobalt, lithium and zirconium. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints, and is especially suitable for externally emulsified alkyd resin emulsions.
allnex
ADDITOL® XL 270
Function: Rheology Modifier, Wetting Agent, Thickener
Labeling Claims: Tin-free, Bio-based, APEO-free
Physical Form: Liquid
End Uses: Solventless & High Solids Coating, Solventborne Coating
Additol® XL 270 is a non-ionic wetting and antisettling agent. It is usually compatible with solvent-based and solvent-free binders, and prevents the sedimentation of pigments in paints.
allnex
ADDITOL® XL 6568
End Uses: Enamel, Clearcoat
Labeling Claims: APEO-free, Bio-based
Features: Corrosion Resistance, High Gloss, Faster Cycle Time, Good Peel, High Film Thickness
ADDITOL® XL 6568 is an anti-adhesion promotor. It is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be peeled off later.