Products results

SU 135A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

OMNIWAX® #1624 Urethane Release Agent is a stable formulation requiring no agitation. OMNIWAX® #1624 has lower wax content than OMNIWAX® #1622 and therefore is especially well suited for non-pourous chrome surface molds.

ALTON MF 4272 is a ready to use water dispersion of titanium dioxide. The special quality and stability of the dispersion, makes it a good alternative to the traditional pigment in powder.

Eager Polymers Polyvinyl Alcohol Release Agent (EP7930) PVA solution is a unique release agent composed of PVA (polyvinyl alcohol) resin in a water and alcohol solvent system. PVA provides positive release with excellent part finish for most resins, and in particular, in reinforced fiberglass production and FRP.

McLube® 916 is ideally formulated for double-wall parts, this release agent forms a durable, protective film with a high degree of slip. May be heat-cured for multiple releases per application.

Minerios Ouro Branco Agalmatolite is a mineral of inorganic constitution basically composed of aluminum silicate, chemically inert, white powder until slightly creamy or grayish, fine, odorless, insoluble extracted from deposits and processed in different granulometric ranges according to the desired application. It is presented in lamellar crystalline form.

Petrolatum DLC-A is a blend of USP Petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum DLC-A incorporates rapidly and aids in filler dispersion.

Dalian Lonsin New Materials LS1608H is fischer tropsch wax.

WSD Chemical Trioctyl trimellitate/TOTM used as a heat-endurant and long-lasting plasticizer for polyvinyl chloride,usually for preparing Grade 105℃ electrical cable and other heat-resisting plastic products.It possesses both advantages being used as plasticizer for polyesters and for general purposes. Except producing oilresisting ones,also used in preparing any long-lasting products.

TR EBS - Ethylene bisstearamide wax for a wide range of polymers used for improved dispersion of pigments and fillers and viscosity modification. TR EBS VG is manufactured from high quality vegetable acid with low iodine value.

TCP is an additive flame retardant plasticizer used in flexible polyurethane foams, whose superiority is demonstrated in excellent hydrolysis stability, good electric insulation performance, superior mildew resistance and abrasion resistance. It can be recommended as flame retardant for synthetic rubber, PVC, polyester, polyolefin, and plasticizer or flame retardant plasticizer for vinyl resin, nitrocellulose, butyl rubber and chloroprene rubber.

PLASTICYL™ PC1501 is a conductive masterbatch based on polycarbonate loaded with 15% of Nanocyl’s MWCNTs (NC7000™). Because of its low viscosity and high flow, PLASTICYL™ PC1501 is ideal for injection molding and extrusion processes.

Camex Limited Polyethylene Wax, also known as Polymer wax, short for Polyethylene Wax, is widely used because of its excellent property of cold / heat / chemical and abrasion resistance. In normal production, this part of wax can be directly added to the polyolefin processing as an additive; it can increase the gloss and processing performance.

MoldWiz® INT-326PWD - A process aid additive and mold release with anti-static properties, which is incorporated directly into the resin eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating.

Acti-Tech™ Compatibilizer 09MA18 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process. Acti-Tech compatibilizer 09MA18 has the highest maleic anhydride content among the Acti-Tech compatibilizers range. It is designed to provide a very high coupling efficiency to enhance performance of a wide variety of polymer compounds requiring high functionality and is particularly recommended for the following applications such as compatibilizer for PA/PP or PET/PP compounds, performance booster for recycled feeds, adhesion promoter for special applications.

SAK- LZS by Sun Ace is a liquid zinc stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LZS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

Starbetter Chemical Materials Anhydrous Zinc Borate ST-FS-2300FB is a dehydrated zinc borate with multifunctional applications in a variety of polymers. Since it contains no water of hydration, it is stable up to 600°C. Therefore, it can be used in polymer systems requiring very high processing temperatures.

SU 120A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

BIONOX® 1035 is a high molecular weight hindered phenolic antioxidant. It is an effective, non-discoloring, sulfur-containing stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation.

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Moulex® 250 is internal mold release agent. Improves the external release agent performances. Reduces external release agent applications and the mold fouling.

Antioxidant 697 is a sterically hindered phenolic antioxidant and metal deactivator. Antioxidant 697 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end‐use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non‐discoloring, non‐staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. Antioxidant 697 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non‐staining and non‐discoloring,FDA approved for adhesives and polymers.

Shandong Yuanli Science and Technology Dioctyl Adipate(DOA) is a typical cold resistant plasticizer of polyvinyl chloride, vinyl chloride copolymers, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.High plasticized efficiency. Products can be given to low-temperature flexibility and good lightfastness.Used with the DOP,DBP plasticizer for cold agricultural film, frozen food packaging film,wire and cable coating, leather, sheet metal and outdoor used etc.

MATER 53 EF is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Shandong Chuanjun Chemical Dipropylene glycol dibenzoate(DPGDE)) is haplotype and Strong solvent based plasticizer.have light ill-smelling.It can be compatible with lots of polymer,very faster dissolve vinyl resins. can reduce the melting temperature and reduce production time. This product is resistant to mineral oil extract and have high flash point no peculiar odor. no harm of touch, have a good compatibility with resins. It can retain the foam structure of tiny when produce opening vinyl foam. Foam products very soft, pore uniformity similar to soft leather. It be made into vinyl flooring can not be infiltration and pollution by asphalt.

Slide Products Heavy-Duty 10% Mold Release Agent (No. 54912) is the highest percentage of active ingredients for a release agent. Food-approved formulation that is paintable.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

Glide™ SL-105 is a Plastic processing often needs a slip agent to assist in polymer flow and provide internal and external slip characteristics. Friction characteristics, when processing polymers, requires slip/lubricants in order to improve cycle times, improve dispersion, assist mold release and improve assembly of molded parts. The amount of slip depends on the process and end use requirements. Consumer packaging requirements often need slip for the finished product, but the plastic processor may also need it to improve processing and plastic parts assembly.

Textile Rubber & Chemical M 132A is Aqueous emulsion.Its Advantages are high flame-retardant efficiency, good plasticizing activity, excellent thermal stability.Compatible with other plasticizer emulsions.

Ve Chemical N762 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Tarene 40 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 40 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

BNX MD-1024 (32687-78-8)is a hindered phenolic antioxidant/metal deactivator used in reducing or preventing the harmful effect of copper or other metals upon various polymers.

Shinepoly® SN2085 modifier is a core-shell impact modifier with high Silicon rubber content that provides superior low temperature impact performance. Because of the core-shell structure, the improvement in impact performance is obtained with only minor effect on other mechanical properties such as modulus and heat distortion temperature.

EKFLEX 483 is a plasticizer based on diisobutyl phthalate (DIBP) and isomers thereof, featuring high solvation power in PVC resins and low viscosity.

Irucomp 110 is a dispersing agent and anti-blooming agent for minerals and polar materials in PP matrix.