Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary resin solution in aliphatic solvent blend.
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Recommended for new,
- green or recently compounded FRP molds. Also used on aluminum molds prior to
- applying XTEND 800 or 802
- HAPS free
Applications & Uses
- Markets
- Applications
- Uses / Mold Preparation
Mold sealer for FRP and metal tooling.
Mold Preparation Mold surfaces should be clean and free of previously used mold releases and other surface contaminants.
New or Green Molds Application Instructions Apply 4-6 coats of S-19C allowing 30 minutes between coats and a minimum of 1 hour after the last coat. Apply 4-6 coats of release after the sealer has cured, allowing 15-30 minutes between coats and a minimum of 30 minutes after the last coat. Re-apply mold release after the first part is pulled.
- Genral Application Instructions / Maintenance
General Application Instructions 1) Apply to ambient temperature molds by wiping with a clean, woven cloth such as the Scott Shop Towels On A Roll ® , Kimberly-Clark WorkHorse rags or WypAll ® wipes, or a heavy-duty plain white paper towel. Apply a smooth, continuous light film. 2) Do not over apply. Wipe on and let dry. Do not rub or rework. 3) A minimum of 2 coats are recommended. Wait at least 15 minutes between each coat. Cure Allow the coated mold to cure for 30 minutes at ambient temperature before applying release. Removal Use CX-200HS. * Due to the unique properties of this material, we require a clean closed application container. The container we find best suited, is a HDPE bottle with a shampoo squeeze style cap, where only a small amount of air is transferred. Gallons should be transferred into the type of container described above. At your request we can supply a sample and source. Drum quantity customers are required to use a desiccant drier attachment to assure proper release performance.
Properties
- Odor
- Paraffinic
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solvents | Aliphatic Hydrocarbons | — | — |
| Effective Ingredients | max. 5 | % | — |
| Specific Gravity (25°C) | 0.73 | — | — |
| Flash Point (C.O.C.) | max. 73 / max. 23 | °F/°C | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 12 months in original unopened container
- Handling
MOISTURE SENSITIVE. KEEP TIGHTLY SEALED. CAUTION: Apply at ambient temperature. DO NOT APPLY TO HOT MOLDS (OVER 350°F/ 177°C) Minimize exposure to atmosphere. Do not return exposed material to can. Store above freezing and below 100ºF / 38ºC. DO NOT DILUTE
CAUTION: Do not apply to hot molds (over 300ºF/148ºC)