Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Continuous fibers of E-CR glass
- Silky touch
- Very low binder content
- Low integrity of the layers of the mat
- Softness of the mat
- Low bundle linear density (tex)
- Provide good mechanical properties in ambient and cool temperatures
- Improve dimensional stability under tem-perature changes
- High resistance to corrosion in water, salt water and alkali conditions
- Easy unrolling and lay down, good adapta-bility to complex shapes
- Fast and easy expansion during the foam generation process
- Good distribution of the reinforcement over the thickness of the foam
- Little resistance to resin flow for an easy and fast wet-through
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Composites End Use
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight | 450 | g/m2 | — |
width | 105-210 | cm | — |
Bundle density | 20 | tex | — |
Solid content | 1.15 | % | — |
Packaging & Availability
- Packaging
- The 3B Continuous Filament Mat is wound on a hard carton tube with an inside hole of 102 mm and an external diame-ter of 110 mm or 118 mm depending on mat widths. A PE stretch film is wrapped around the roll to protect the material during handling and to help the slicing. All 3B CFM rolls have 2 sides trimmed. The outside diameter of the roll is a standard of 55 cm.
- For mat widths up to 190 cm: 6 vertical rolls per pallet
- For mat widths above 190 cm: 6 horizontal rolls per palletFor more details on the packaging, please contact the technical person
Storage & Handling
- Storage
Storage in a cool and dry warehouse into the original packaging is formally recommended. More precisely ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity comprised between 35% and 75%. The product should remain in its original packaging, closed.If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recom-mended to condition it in the workshop for at least 24 hours before use to prevent condensation.For an optimal processing we recommend to use the product in ambient conditions (20°C-23°C and a relative humidity of 60%-65%).