Knowde Enhanced TDS
Identification & Functionality
- Backing Material Type
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Application
One-Way 2M is recommended for fine and medium grit applications that require high flexibility, or a low profile where joint thickness is critical. In addition, One-Way 2M can be used with glue bond, resin/glue, full resin, and waterproof coated abrasives for narrow or wide belts. All Adirondack One-Way products are supplied with our exclusive primer system which has been specifically designed to promote adhesion of urethane adhesives to the tape. This specially designed polymer primer impregnates the fiber bundles and reduces yarn splitting that can occur with high viscosity adhesive systems. In addition, the primer stops filament displacement that can occur during adhesive application on loop type knife coaters.
Processing
Primed ADK tapes are advantageously used in a two-way adhesive application using contact bonding under pressure with heat activation.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Thickness | 2.0 | mils | — |
| Tensile Strength | 115.0 | lbs/in | — |
| Flexural Strength (Wet/Dry) | min. 15000 | cycles | — |
| Belt Grit Range | 120 and finer | grit | — |
| Adhesive Application to Tape | 1.5 - 2.0 | mils | — |
| Adhesive Application to Backing | 3 - 12 | oz/yd2 | — |
| Drying Time (At room temperature depending on the amount of curing agent and relative humidity) | 10 - 30 | minutes | — |
| Press Cycle (Time) | 10 - 20 | seconds | — |
| Press Cycle (Temperature) | 72 - 150 | °F | — |
| Press Cycle (Pressure) | 2000.0 | psi | — |
| Curing Temperature | Room Temperature | — | — |
| Curing Time (Full cure) | 48 - 72 | hours | — |
Safety & Health
- Health and Safety Information
Appropriate literature has been assembled which provides information concerning the health and safety concerns that must be observed when handling this product. Before working with this product, personnel must read and become familiar with the available information concerning its hazards, proper use and handling. This cannot be overemphasized. Information is available in several forms, i.e., Material Safety Data Sheets and product labels. Consult your Adirondack representative if you have not received this literature.
Storage & Handling
- Storage
One-Way 8 is stable for at least 1 year when stored under cool, dry conditions (about 72°F). It must be protected from exposure to humidity and direct sunlight.