Company logo

Aegis® H155C1HXI

Sold by AdvanSix
Polymer Name: Polyamide (unspecified)
Processing Methods: Extrusion, Film Extrusion
Start Order
Order Quantity
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required

Ask AdvanSix Questions

User Avatar
User Avatar
User Avatar

Ask the Supplier

User Avatar
User Avatar
User Avatar
TypeDocument Name
Technical Data Sheet
Aegis® H155C1HXI Technical Data Sheet
Aegis® H155C1HXI Technical Data Sheet
Technical Data Sheet

Knowde Enhanced TDS

Expand All


Identification & Functionality

Chemical Family
Plastics & Elastomers Functions

Aegis® H155C1HXI Features & Benefits

Applications & Uses


Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Moisture (Saturation)10%ASTM D-570
Melting Point187 (369)°C (°F)ASTM D-3418
Specific Gravity (at 23°C (73.4°F))1.12-ASTM D-792
Extractable Content6.0 - 8.0%SOP-702-307
Moisture (at 50% RH)3.1%ASTM D-570
Pellet Properties
ValueUnitsTest Method / Conditions
Viscosity (FAV)125 - 145-ASTM D-789
SAV (at 96% Sulfuric Acid)3.65 - 3.85--
Bulk Density670kg/m³-
Pellet ShapeCylindrical--
Pellet Size1.9 - 2.5mm-
Moisture Contentmax. 0.12%ASTM D-6869

Storage & Handling

Material Handling

This product is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. Further information concerning safe handling procedures can be obtained from the Safety Data Sheet. Alternatively, please contact your AdvanSix representative.

Aegis® H155C1HXI