company tower banner

Products

AdvanSix

Devices & AssembliesApplications

Automotive Electronics

Automotive Electronics

Other Devices & Assemblies

Other Devices & Assemblies

6 Products found on AdvanSix in Devices & Assemblies

TDSWith TDS

Aegis® H100ZP banner

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Thermoforming, Extrusion, Cast Film Extrusion, Blown Film Extrusion, Film Extrusion

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB banner

Aegis® H8202NLB

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding, Compounding
Flexural Modulus:3010.0 - 3010.0 MPa

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI banner

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Additives Included:Lubricant (Unspecified)
Flexural Modulus:2465.0 - 2465.0 MPa

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H8202NL banner

Aegis® H8202NL

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Compounding, Injection Molding

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI banner

Aegis® PIR-H35ZI

Polymer Name:Polyamide 6 (PA 6)
Additives Included:Lubricant (Unspecified)
Labeling Claims:Recycled, Contains PIR Resin, Sustainable
Processing Methods:Injection Molding
Density:1120.0 - 1120.0 kg/m³

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB banner

Aegis® PIR-H8202NLB

Polymer Name:Polyamide 6 (PA 6)
Labeling Claims:Recycled, Contains PIR Resin, Sustainable
Processing Methods:Compounding, Injection Molding
Density:1130.0 - 1130.0 kg/m³

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.