Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding, Compounding
Start Order
SecureOrder Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required
Ask AdvanSix Questions
Ask the Supplier
Popular AdvanSix Products
View all AdvanSix ProductsProduct NameProduct FamiliesApplications
Aegis® H100QP Polyamides Food & Beverage Packaging, Industrial & Transport Packaging, Other Consumer Goods Applications
Aegis® H35ZI Polyamides Equipment & Parts, Powertrain & UTH, Interior, Other Consumer Goods Applications, Automotive Electronics, Sports & Recreation, Aftermarket Parts & Components, Other Devices & Assemblies
Aegis® H55ZP Polyamides Textile Manufacturing, Equipment & Parts, Coated Paper & Paperboard, Powertrain & UTH, Interior, Automotive Electronics, Sports & Recreation, Carpet & Upholstery, Aftermarket Parts & Components, Other Consumer Goods Applications, Other Textile Applications
TypeDocument Name
Brochure
Aegis Compounding Resins Flyer
Aegis Compounding Resins Flyer
BrochureTechnical Data Sheet
Aegis® H8202NL Technical Data Sheet
Aegis® H8202NL Technical Data Sheet
Technical Data SheetKnowde Enhanced TDS
Identification & Functionality
Chemical Family
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Aegis® H8202NL Features & Benefits
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Processing Guidelines
Material Handling
Aegis® H8202NL resin is supplied in sealed containers and drying prior to processing is not required. However, high moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level.
Properties
Physical Form
Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1.13 | g/cm3 | ASTM D-792 |
Extractable Content | max. 0.80 | wt% | SOP-702-307 |
Melting Point | 220 (428) | °C (°F) | ASTM D-3418 |
Moisture Content | max. 0.10 | wt% | ASTM D-6869 |
Viscosity (FAV) | 49 ± 3 | - | ASTM D-789 |
Aegis® H8202NL
AdvanSix