Products

AGC Chemicals Americas, Inc. Fluon+™ FL1680 lubricant is a white, finely divided, low molecular weight powder manufactured from virgin PTFE feedstock. It has an average particle size of 11 microns, a narrow particle size distribution and low surface area. FL1680 is virtually immune from chemical attack, is water repellent, has good electrical insulation properties, a wide working temperature range and has excellent weathering and aging characteristics.

AGC Chemicals Americas, Inc. Fluon+™ FL1690Z is a white PTFE (polytetrafluoroethylene) micro powder. It is a lubricant milled to a very fine powder while retaining excellent lubricity properties. These powders can be compounded rubber and plastics or dispersed in liquids to improve the friction and wear properties of the base material. The particles of this area of intermediate hardness, permitting mixing without further breakdown. It is suitable for use in food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ FL-1700Z is a white PTFE (polytetrafluoroethylene) micro-powder that is suitable as an economical and general-purpose dry lubricant in rubber and plastics compounding, and grease applications. This product is suitable for use in food contact applications. The particles are coarse and friable and some size reduction of the larger particles will occur during compounding.

AGC Chemicals Americas, Inc. Fluon+™ FL1710Z is a white finely divided PTFE (polytetrafluoroethylene) micropowder which is easy to disperse in a wide range of liquids. FL1710Z is particularly suitable for use in surface coatings, metal decorating inks, low viscosity lubricating oils and is readily dispersed in liquids using either high or low shear mixing. This combination of properties makes FL 1710Z very useful in coating formulations and makes it suitable for use in food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ TL-120 is a white, FEP (fluorinated ethylene propylene) micropowder with a very small particle size. It has excellent thickening power when used as an extreme pressure (EP) agent in hydrocarbon and fluorosilicone fluids, and is used to meet MLGI Class 2 Specifications. Fluon+ TL-120 is ideally suited as an additive to all solid and liquid media. In printing inks, it may be used as an anti-scuff and release agent. It is suitable for food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ TL-171EZ is a white PTFE (polytetrafluoroethylene) micropowder which is easy to disperse in a wide range of liquids. The reduced total surface areas of Fluon+ TL-171EZ minimizes viscosity increase during mixing. The particles are soft, however, and retain good film forming capability. This combination of properties makes Fluon+ TL-171EZ very useful in coating formulations. Fluon® TL-171EZ is suitable for use in food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ TL-368 is a white PTFE (polytetrafluoroethylene) micro-powder that is suitable for compounding in rubber and plastics. The particles of this product are of intermediate hardness, permitting mixing without further breakdown. The slight fibrous nature of Fluon+™ TL-368 will give greater viscosity in fluids. This product is suitable for use in food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 White Concentrate is a white color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Orange Concentrate is an orange color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Green Concentrate is a green color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Blue Concentrate is a blue color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FL1650Z is a finely milled PTFE (polytetrafluoroethylene). It is especially suitable for thermoplastic applications. This micropowder may also be used for compounding in rubber and thermoset products. The rounded particle shape and intermediate hardness permit mixing without further breakdown and without large increases in viscosity. This product is FDA compliant for food contact applications. FL1650Z also features a low volatile content which may have value in specialized applications.