Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Particle Type
Soft, round sub-micron particles in clusters
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Fluids & Lubricants Type
- Micropowder Application Areas
Primary Usage
- Coatings
Secondary Usage
- Dry Lubricants
- Aerosols & Solvents
- Oils & Greases
Properties
- Typical Properties
- Particle Smear Sensitivity
Cluster break-up to smaller size upon mixing
Value | Units | Test Method / Conditions | |
Bulk Density | 500 | — | ASTM D-4894 |
FDA Compliance | CFR 175.300, CFR 177.1550 | — | CFR Number |
Melting Point | 628 (331) | ºF (ºC) | ASTM D-3417 |
Moisture Content | max. 0.1 | % | ASTM D-4019 |
Oil Absorption | 45 | lb oil / 100 lb | ASTM D-1438 |
Oil Penetrometer | 99 | 1/10 mm | ASTM D-1403 |
Particle Size | 4 | microns | Hegman ASTM D-1210 |
Particle Size – Low Shear (Average) | 9 | μm | Laser Diffraction |
Particle Size – Low Shear (D10) | 5 | μm | — |
Particle Size – Low Shear (D90) | 16 | μm | — |
Surface Area | 2.6 | m²/g | AGC Chemicals Americas |
Volatile Content | 0.06 | % | AGC Chemicals Americas |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
- Physical hazards: None
- Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
TL-171EZ is supplied in 25 kg laminated fiber board kegs.
Storage & Handling
- Storage
The powder is contained within two polythene liners, individually sealed.Kegs of TL-171EZ should be stored in cool, dry condiions prior to use.
- Handling Precautions
- Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
- Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.