Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Chemical Name
- Cosmetic Ingredients Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Benefit Claims
- Labeling Claims
- Characteristic Features
I . Water repellent performance
Test method: Measured 30mL purified water in 50mL nessler tube, and added 1g test powder. Then observed condition.
SUNSPHERE H-121
(1): Non-treated
(2): Silicone 1% Mechanochemical treatment
(3): ET product*
* The particles absorb water by hard stirring.II. Texture Improvement
Test method: Applied 0.5mg/cm2 test powder on artificial leather Supplare® (made by Idemitsu Techno Fine) , and evaluated texture by KES-SE friction tester (made by Kato tech and sensor:artificial leather Supplare, load 25g).
III. Dispersibility to oils (Silicone 6cs)
Test method: Added Dimethicone 6cs in test powder gradually, and mixed by a palette knife. Where the triangular pyramid was made is the point of the oil absorption. At that time when the test powder started to fluid down from a palette knife was a fluid point, after added Dimethicone 6cs furthermore. The difference of both points is indicator of dispersibility.
IV. Hygroscopicity and moisture retention capability
Test method: Spread about 0.3g of the test sample in a petri dish thinly, and leave to stand under relative humidity from 10 to 90 % for 48 hours at 25°C. After 48 hours, measured its gravity and evaluate hygroscopicity of the test sample.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- AP/Deo Applications
- Color Cosmetic Applications
- Fragrances & Perfume Applications
- Plastics & Elastomers End Uses
- Skin Care Applications
- Application Information
Cosmetics and Personal Care
SOLESPHERE™ silica gels are used as additives in cosmetic and personal care applications such as make-up, skin care products, deodorants and fragrances.
Resins and Polymer Compounds
When added to polymer formulations, SOLESPHERE™ silica gels offer anti blocking and improved dielectric insulation properties. SOLESPHERE™ also provides good UV and hardness properties as an additive for 3D resins.
Catalyst Supports
SOLESPHERE™ is used as a catalyst support carrier particularly with polyolefin manufacturing processes.
Paper Coating
By adding SOLESPHERE™ to paper coating formulations, surface hardness can be increased and matting effect improved.
Coatings
SOLESPHERE™ silica gels are used to improve the matting effect in coatings, as a thickener for paints, and for specialized paints for electronic materials.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mean Particle Size | 5 | μm | — |
| Oil Absorption | 120 | mL/100g | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Model Structure
Safety & Health
- Safety and Handling
A Safety Data Sheet for this product may be obtained from your local AGC representative. Before handling, it is recommended to review the Safety Data Sheet for handling, safe, and health information.
Packaging & Availability
- Packaging
SOLESPHERE™ is packaged in a triple lined polyethylene bag contain in a cardboard carton. The box unit is 20 kgs for SOLESPHERE™ H-31, H-51, H-121 and H-32. For SOLESPHERE™ H-51, N-122, H-33 and H-53, the box unit is 10 kgs. There are 18 boxes per pallet.
Storage & Handling
- Storage and Shelf Life
SOLESPHERE™ silica gels have a shelf life of 2 years from the date of manufacture when stored in the original, unopened package between 10 and 40 ºC.