Products

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 158 (310999302) is a polyphenylene sulfide-filled PTFE compound designed for use in seal applications. This compound is supplied in dry powder form. Polyphenylene sulfide is added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-730 (311100576) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and is suitable for use when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

AGC Chemicals Americas, Inc. Fluon+™ FC444.0 (340444004) is a 40% bronze filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 148 (310999295) is a composite material made of PTFE, polyphenylene sulfide, and graphite. It is designed for use in seal applications and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance. This material can be processed using compression molding equipment to create thick-walled parts.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 404 (340404031) is a PTFE compound reinforced with 20% glass fibers. This material is supplied in round pellets, with a size range of 350-800 microns. The addition of glass fibers improves the wear resistance, compressive strength, and creep resistance of PTFE, while maintaining its chemical and thermal resistance. It is designed for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 485.0 (340485000) is a bronze powder and molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder & molybdenum disulfide are added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 423 (340423010) is a 15% graphite powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Graphite powder is added to PTFE to improve its lubricity and wear properties, particularly against soft metals.

AGC Chemicals Americas, Inc. Fluon+™ FC 472 (330331002) is a 5% glass and 5% molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers and molybdenum disulfide are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ FC 108 (310108001) is a 40% glass-filled PTFE product designed for use in gasket and seal applications. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 442 (340999443) is a polyphenylene sulfide and graphite filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The polyphenylene sulfide and graphite fillers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 403 SP LS (330003015) is a 15% glass-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellet sizes ranging from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FL1680 lubricant is a white, finely divided, low molecular weight powder manufactured from virgin PTFE feedstock. It has an average particle size of 11 microns, a narrow particle size distribution and low surface area. FL1680 is virtually immune from chemical attack, is water repellent, has good electrical insulation properties, a wide working temperature range and has excellent weathering and aging characteristics.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN (310154464) is a 15% wollastonite-filled PTFE product. This compound is supplied in dry powder form. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer. Additionally, wollastonite is an FDA compliant filler.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI (310999107) is a 15% polyimide-filled PTFE product supplied in dry powder form. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 444 (340444001) is a 40% bronze powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, while maintaining the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 474 SPL 2 (340474100) is a glass and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form and these pellets range in size from approximately 350 – 800 microns.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-101 (464102517) is a 5% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FC 103 Billet (310103012) is a 15% glass-filled PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 500 (340500000) is a PTFE product that is supplied in a round pelletized form with a size range of approximately 350 - 800 microns. It has excellent chemical and thermal resistance properties, making it suitable for various applications. Additionally, it has a high bulk density and flow properties, making it compatible with automatic molding equipment, standard design hoppers, and other bulk feeding equipment.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2220 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2220 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-092 (311509200) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and can be used when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

AGC Chemicals Americas, Inc. Fluon+™ FC 407 (340407040) is a 35% glass-filled, PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 446 (340446030) is a 60% bronze powder-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase thermal and electrical conductivity and to improve wear properties and deformation resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST (310154081) is a 50% stainless steel filled PTFE product designed for use in high wear and load-bearing applications. This compound is supplied in dry powder form and can be processed using compression molding equipment to mold thick-walled parts. Stainless steel is added to PTFE to improve wear properties and load bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 (340482003) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2020 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2020 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL II (340482045) is a PTFE product filled with a combination of bronze powder and molybdenum disulfide. It is designed for use in seal applications and is supplied in round pelletized form with a size range of 350 - 800 microns. The added fillers increase the thermal and electrical conductivity, as well as improve the wear properties and deformation resistance of the PTFE without compromising its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-1120 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-1120 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 433.3 (340433300) is a 15% graphitized carbon fiber-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of graphitized carbon fibers to PTFE improves the wear properties, compressive strength, hardness, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.