Products

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ L-51 is a synthetic spherical silica with low cohesiveness and high fluidity. SOLESPHERE™ L-series has a lower specific surface area than the H-series grades. It is suitable for chemical surface modification or coating. Despite the difference in surface area, the L-series products keep the same oil absorption capacity as the H-series. It also offers better slipperiness and spreadability than the H-series. Because of the product's porosity, it has a light scattering effect for cosmetics and acts as a matting agent for coatings. Its particle size distribution is narrow, and hence it can give a single asperity to a thin coating layer.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-30 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-52 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-53 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-200 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-32 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-31 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-122 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ L-31 is a synthetic spherical silica with low cohesiveness and high fluidity. SOLESPHERE™ L-series has a lower specific surface area than the H-series grades. It is suitable for chemical surface modification or coating. Despite the difference in surface area, the L-series products keep the same oil absorption capacity as the H-series. It also offers better slipperiness and spreadability than the H-series. Because of the product's porosity, it has a light scattering effect for cosmetics and acts as a matting agent for coatings. Its particle size distribution is narrow, and hence it can give a single asperity to a thin coating layer.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-51 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-201 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-121 is a synthetic spherical silica with low cohesiveness and high fluidity. This product leaves a smooth, hydrated skin feel with a matte visual effect. It is multi-porous and has a high specific surface area. This product offers the most functionality for O/W emulsions.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-33 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-100 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN SPL (340454463) is a 15% wollastonite-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 433 SPL (340433001) is a 15% soft carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Soft carbon is added to PTFE to improve the wear properties, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 7 PI FF (340461400) is a polyimide-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, while maintaining the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL (340482030) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance of PTFE, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 458 (340999102) is a polyphenylene sulfide-filled PTFE product designed for use in seal applications. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350-800 microns. Polyphenylene sulfide is added to improve the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC444.0 (340444004) is a 40% bronze filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 485.0 (340485000) is a bronze powder and molybdenum disulfide filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder & molybdenum disulfide are added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 404 (340404031) is a PTFE compound reinforced with 20% glass fibers. This material is supplied in round pellets, with a size range of 350-800 microns. The addition of glass fibers improves the wear resistance, compressive strength, and creep resistance of PTFE, while maintaining its chemical and thermal resistance. It is designed for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 444 (340444001) is a 40% bronze powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, while maintaining the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® PTFE G201C is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon+™ FC 433.3 (340433300) is a 15% graphitized carbon fiber-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of graphitized carbon fibers to PTFE improves the wear properties, compressive strength, hardness, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 500 (340500000) is a PTFE product that is supplied in a round pelletized form with a size range of approximately 350 - 800 microns. It has excellent chemical and thermal resistance properties, making it suitable for various applications. Additionally, it has a high bulk density and flow properties, making it compatible with automatic molding equipment, standard design hoppers, and other bulk feeding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL II (340482045) is a PTFE product filled with a combination of bronze powder and molybdenum disulfide. It is designed for use in seal applications and is supplied in round pelletized form with a size range of 350 - 800 microns. The added fillers increase the thermal and electrical conductivity, as well as improve the wear properties and deformation resistance of the PTFE without compromising its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 423 (340423010) is a 15% graphite powder-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Graphite powder is added to PTFE to improve its lubricity and wear properties, particularly against soft metals.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 442 (340999443) is a polyphenylene sulfide and graphite filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The polyphenylene sulfide and graphite fillers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 433 (340433000) is a 15% carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Carbon is added to PTFE to improve the compression strength, hardness, and wear properties of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FR 03 (330003010) is a high flow PTFE compound that contains 15% glass fibers, which are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer. This compound is supplied in round pelletized form and the pellets range in size from approximately 325 - 700 microns, making it suitable for use in seal applications.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 (340482003) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide to PTFE improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 407 (340407040) is a 35% glass-filled, PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST FF (340454082) is a 50% stainless steel-filled PTFE product. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Stainless steel is added to PTFE to improve the wear properties and load-bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 446 (340446030) is a 60% bronze powder-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase thermal and electrical conductivity and to improve wear properties and deformation resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 403 SP LS (330003015) is a 15% glass-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellet sizes ranging from approximately 350 - 800 microns. Glass fibers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.