company tower banner
AI Technology Company Logo

AI Technology SR 8850-1

SR8850-1 is a room temperature curable, silver coated copper filled, electrically conductive RTV silicone sealant/adhesive. It can be used as a coating if dissolved or diluted with low boiling point solvent, such as naphtha. The material has no corrosive by-products and has good adhesion properties to metals, plastics, silicones, ceramics and glass. It is useful for bonding large area substrates and components of any size. The material is provided as a one-part electrically conductive elastomer/silicone with a compatible primer. The silicone cures when exposed to atmospheric conditions. The typical curing schedule is 24 hours at 25°C and 60% relative humidity. Using a large volume of paste requires a cure schedule of 48 hours at 25°C and 60% relative humidity.

Product Type: Sealant

Chemical Family: Silicones

Technical Data Sheet

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Product Type

Features & Benefits

Labeling Claims
Product Features
  • Conductive RTV silicone.
  • Sealant/adhesive/coating.
  • No corrosive by-products.
  • EMI/RFI shielding applications.
  • Caulking use.
  • Bonding Mismatched CTE materials.

Applications & Uses

Application Procedures
  • The surface to which SR8850-1 is to be applied should be thoroughly cleaned.
  • The primer is applied in a manner to produce a thin, uniform coating on metals.
  • Allow primer to air dry for not less than one hour and protected from contamination.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Electrical Resistivity (at 25°C, 48hrs)9x10⁻³ to 11x10⁻³Ω-cm
Lap Shear Strengthmin. 100psi
Device Push Off Strengthmin. 100psi
Hardnessmin. 30Shore A
Cured Density2.7 - 3.3g/cc
Thermal Conductivity1.26 - 1.54W/m-°C
Maximum Continuous Operation Temperaturemax. 125°C
Pot Life3hours
Pot Life90minutes
Electrical Resistivity5x10⁻³Ω-cm
Peel Strength2.5ppi
Curing Schedule (at 25°C, 50% RH)24hours

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Cure Schedules
Temperature Time
125°C 24 hrs
175°C ** 48 hrs
Note
  •  **48 hrs is required to cure a higher volume of paste used for large bead and high thickness applications,
  • For full curing and/or bond strength measurements, 5-7 days curing with >50% RH is recommended. Acceleration curing at high termperature in humidity chamber with more than 85%RH is possible.

Packaging & Availability

Product Availability

The material is normally supplied in 4, 6 and 12 oz. sizes It consists of the silicone adhesive portion in a plastic dispenser cartridge with the primer in a glass container. Both heat sealed in an aluminum bag with dessicant to protect them from moisture.

Storage & Handling

Shelf Life
6 Months (at 25°C)
Storage Information

Storage temperature: 25°C in original package.