company tower banner
AI Technology Company Logo

FLUROSEAL® SC7130-CC

1 of 1 products in this brand
FLUROSEAL® SC7130-CC is a non-silicone, transparent, electricaly insulating conformal coating that meets and exceeds Parylene performance at the same thickness. The dried coating is hydrophobic in nature with outstanding direct sun and UV exposure stability. Proven outstanding moisture and water barrier for proven protection of circuit boards for aeronautic electronics even when exposed to salt-spray hot ocean weather. The outstanding flexibility and adhesion on printed circuit board provide interfacial stress reduction in achieving long-term reliability. FLUROSEAL® SC7130-CC is a fluorinated polymer based conformal coating that are ideal for blocking moisture and corrosive gasses including sulfur dioxide, hydrogen sulfide and other corrosive gasses. lt can also be brushed or sprayed onto metals and joints to protect against corrosion.

Product Type: Conformal Coating

Features: Corrosion Resistant, Electrically Insulating, Excellent Salt Spray Resistance, Excellent UV Stability, Hydrophobic, Moisture Barrier, Non-Hygroscopic, Water Resistant

Compatible Substrates & Surfaces: Metal

Application Method: Brush, Dip Coating, Spray

Chemical Family: Fluorinated Compounds

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Product Type

Features & Benefits

Labeling Claims
Product Highlights
  • Water/Moisture Barrier
  • Passes Flower of Sulfur Test
  • IPC-CC-830C Certified Conformal coating
  • Dip, Brush or Spray Coating
  • Ultra-High Insulation Resistance

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Applications
  • Industrial Corrosive Gasses Protection
  • Excellent for high sulfur environments
  • Protection in hazardous environment from -55°C to 125°C
  • Proven moisture-heat, salt-spray protection
  • "Parylene" performance with repairability
Application Process
  • Clean coating surfaces to remove grease, dirt, and contaminants. Mask off any areas that should not be covered.
  • Dip-brush or spray coating on designated areas.
  • For spray coating, airless spray is preferred. For air spraying, please reduce and adjust air intake and proximity to the spraying areas for optimized results.
  • Double coating processes are generally recommended to ensure full and complete coverage at thickness of 15-50 micron.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Electrical Resistivity (25 °C)min. 1x10¹⁴ohm-cm
Dielectric Strengthmin. 550
Glass Transition Temperature-60.6 to -49.5°C
Cured Density1.6gm/cc
Thermal Conductivity0.18 - 0.22W/m-°C
Linear Thermal Expansion Coefficient63.75 - 86.25ppm/°C
Maximum Continuous Operation Temperaturemax. 150°C
Pot Life1 year
Viscosity540 - 660cps

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Cure or Drying
Temperature Time
25°C >30 min

 

  • Please use under suitable ventilation and/or provision to avoid excessive inhaling of solvent.
  • Shake solution well to ensure uniform solution at least 30 minutes before using. Insulation Resistance Per IPC-TM-650, Method 1.6.3.4>10e11Ω (1100 times the highest requirement).

Packaging & Availability

Availability

SC7130-CC is available in pint and gallon containers.

Storage & Handling

Shelf Life
1 year (25°C)