Products

ME7635-RC is an thermally conductive insulating epoxy adhesive for die-attach applications. This thixotropic paste is solvent free. It is designed for automated, inline bonding processing ME7635-RC is low in ionic impurities (<60 ppm total) and meets all requirements for MIL-Std 883D 5011.4 specification for dielectric adhesive. Fast curing can be achieved from 80°C and higher temperatures.

ME8550-DA is a die attach epoxy paste adhesive designed for needle dispensing and screen-printing processing. This silver filled conductive die-attach adhesive can be rapidly cured at low temperatures.This single component, silver filled paste is electrically and thermally conductive. It is thixotropic with minimal sag. ME8550-DA has been designed to eliminate bleeding on both silver plated copper and alloy 42 leadframes.

EG8050-LV is an electrically conductive, silver filled epoxy which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked at 80-150°C and is ideal for applications such as large area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE.

ME 8418 is designed for automated, inline processing. This single component, silver filled paste is solvent free, and electrically and thermally conductive. It is highly thixotropic with outstanding compatibility for bonding different adherends. The higher Tg and modulus made it more suitable for bonding smaller devices only. Wire- bonding at temperatures as high as 250°C is permissible. ME 8418 has been designed to eliminate bleeding on both silver plated copper and alloy 42 leadframes.

MEB650-DA is a low viscosity silver filled flexible epoxy paste. This low ionic silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It is ideal for automatic dispensing in die- attach application with fine definition. Absolutely solvent-free and diluent free composition with low ionic impurities for high reliability. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This stress free adhesive shows consistent medium bond strength up to 250°C at 200 psi.

ME8452-A is an accelerated version of ME8452 for snap-curing applications.This novel silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C and is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

EG 8050-HC is a more conductive version of EG 8050 which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked at 80-150°C and is ideal for applications such as large-area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE's.

ME7158 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The very high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-150°C with torque or peel stress.

EG7635 is a alumina filled, electrically insulating and thermally conductive rigid epoxy paste adhesive. While bonding at ambient temperature can be achieved overnight, elevated temperatures will accelerate curing, exponentially. EG7635 high thermal conductivity and high strength makes it excellent for bonding substrates, components and heat sinks where thermal management is critical. It has more than 15 years of proven records of providing bonding to difficult substrates. EG7635 exibits reduced bond strength at 80-100°C for easier rework.

TP7155 is an aluminum oxide filled, medium bond strength thermoplastic film adhesive designed for bonding die, component, and substrate. It has good thermal conductivity. The dry, tack-free handling of the film makes it suitable for automated assembly. TP7155 is designed for bonding parts that may be operaung at 160 continuously. If excessive tensile stress is expected at temperature above 150°C, additional mechanical support may be considered.

ME7665-DA is a rapid curing dielectric die-attach thermal adhesive. It contains alumina crystallite of less than 3 micron in particle size. It is a fast curing insulating epoxy adhesive for snap-curing applications. This thixotropic (TI is approx. 4.0) paste is solvent free. It is designed for automated, online bonding processing. ME7665-DA-LV is thermally conductive with less than 20 ppm ionic impurities. It can be dispensed with traditionally pressure-time or more accurately with positive volumetric dispenser. It has medium viscosity and high thixotropic index.