Products

Akron Coating and Adhesives ACA-10-102 is a waterborne, semi-gloss, black, chemically-resistant coating. A cross-linking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhances the metal adhesion.

Akron Coating and Adhesives ACA-10-413 is a water-borne heat resistant electrically resistant coating designed for application to stainless steel and other metals. ACA 10-413 should be evaluated where electrical insulation is required on metal foil and where considerable heat resistance is also required. Apply 0.3 to 0.5 mils of coating onto the metal foil in order to enjoy a pinhole free coating. If pinholes do appear, it may be necessary to apply a second thin coating to fill the pinholes.

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

Akron Coating and Adhesives ACA-10-101 is a water-borne, matte black, chemically resistant coating designed especially for resistance to exterior exposures encountered in automotive applications. A crosslinking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhance the metal adhesion.