Products

Akron Coating and Adhesives ACA-30-100 is a waterborne blend of epoxy and polyurethane resins containing adhesion promoters. The system contains no crosslinkers when shipped. A crosslinker may be added to further enhance hot strength and solvent resistance, after which the product will have a 3 day pot life. Contact ACA regarding use of the crosslinker.

Akron Coating and Adhesives ACA-30-101 is waterborne dispersions of heat activated adhesives formulated to be used with a variety of grades of TPO/TPE materials. ACA 30-101 is for the softer grades of TPO/TPE, and has the lowest melting point.

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

Akron Coating and Adhesives ACA-10-102 is a waterborne, semi-gloss, black, chemically-resistant coating. A cross-linking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhances the metal adhesion.

Akron Coating and Adhesives ACA-10-413 is a water-borne heat resistant electrically resistant coating designed for application to stainless steel and other metals. ACA 10-413 should be evaluated where electrical insulation is required on metal foil and where considerable heat resistance is also required. Apply 0.3 to 0.5 mils of coating onto the metal foil in order to enjoy a pinhole free coating. If pinholes do appear, it may be necessary to apply a second thin coating to fill the pinholes.

Akron Coating and Adhesives ACA-20-527 is a waterborne pressure sensitive adhesive. This pressure sensitive adhesive is very high in solids to facilitate rapid drying during the application process. The dry adhesive exhibits high sheer resistance, resistance to high temperatures and sufficient tack to facilitate rapid assembly.

Akron Coating and Adhesives ACA-30-016 is a heat activated latent cure waterborne adhesive. The adhesive will work with plastic over-molding or extrusion onto the metal. Pre-heating metal components to 200°F may be necessary in injection molding applications. The adhesive is unique in that it has a latent cure mechanism that cures the adhesive during heat activation providing salt-water and solvent resistance.

Akron Coating and Adhesives ACA-10-101 is a water-borne, matte black, chemically resistant coating designed especially for resistance to exterior exposures encountered in automotive applications. A crosslinking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhance the metal adhesion.