Products

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

Akron Coating and Adhesives ACA-10-413 is a water-borne heat resistant electrically resistant coating designed for application to stainless steel and other metals. ACA 10-413 should be evaluated where electrical insulation is required on metal foil and where considerable heat resistance is also required. Apply 0.3 to 0.5 mils of coating onto the metal foil in order to enjoy a pinhole free coating. If pinholes do appear, it may be necessary to apply a second thin coating to fill the pinholes.

Akron Coating and Adhesives ACA-10-100 is a water based matte black coating which exhibits heat resistance to over 500°F without smoking, blistering, or the loss of adhesion or flexibility. The black coating is intended for application to 1 or 2 mil soft aluminum foil where intense infrared heat from Klieg lights or space heaters is encountered. Further, the coating is a potential candidate for other high temperature applications. It is advisable to test for suitability for the specific application. A curing agent must be stirred into the coating immediately prior to coating. The pot life is about 3 days. Viscosity reduction may be accomplished by the careful addition of water.