Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Performance Highlights
Ebecryl®3105 is characterized by:
- low viscosity
- high reactivity
UV/EB cured formulations based on Ebecryl®3105 are characterized by the following performance properties:
- good flexibility
- very good adhesion to wood
- toughness
The actual properties of UV/EB cured formulations depend on the selection of the other components, such as reactive diluent(s), additives and photoinitiators.
Applications & Uses
- Markets
- Applications
- Cure Method
- Coating Type
- Suggested Applications
UV/EB curable formulations containing Ebecryl®3105 may be applied by direct or reverse roller coater. Ebecryl®3105 is recommended for use in:
- primers for wood
- clear coatings for paper, wood, flexible and rigid plastics
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.18 | g/cm³ | — |
| Functionality (Theoretical) | 2 | — | — |
| Molecular Weight (Theoretical) | 900 | — | — |
| Polymer Solids Content | 100 | % wt | — |
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 5 | mgKOH/g | — |
| Color | max. 5 | — | Gardner |
| Viscosity (60°C) | 600 | mPa.s | — |
Technical Details & Test Data
- Viscosity Reduction
Ebecryl®3105 can be diluted with reactive monomers such as 1,6 hexanediol diacrylate (HDDA), trimethylolpropane triacrylate (TMPTA), tripropyleneglycol diacrylate (TPGDA), dipropyleneglycol diacrylate (DPGDA) and oligotriacrylate (OTA 480). The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility.
EBECRYL®3105 + 50% 40% 30% 20% 10% TMPTA 1230 1980 3300 5440 8400 OTA 480 1030 1810 3110 5430 8290 TPGDA 273 577 1220 3130 6710 HDDA 115 243 555 1600 4470 DPGDA 214 373 1020 2610 5920
Safety & Health
- Precautions
The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details. The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors.
Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.
See Safety Data Sheet for emergency and first aid procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat.
Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.