EBECRYL® 4141

Identification & Functionality

Chemical Family

Urethane Acrylates

CASE Ingredients Functions

Binder & Resin

Technologies

CASE Ingredients

Product Families

CASE Ingredients — Resins & Binders

Acrylics

Features & Benefits

Labeling Claims

Bisphenol A-free,

Low Carbon Footprint (PCF),

Solvent-free,

VOC-free

CASE Ingredients Features

Faster Cycle Time,

High Gloss,

Improved Chemical Resistance,

Low Energy Consumption,

Low Temperature-Curing,

Multi-Substrate Adhesion

Applications & Uses

Markets

Paints & Coatings

Applications

Paints & Coatings — Building & Construction

Wood Coatings & Finishes

Paints & Coatings — Industrial Coatings

Furniture Coatings,

Industrial Coatings

Paints & Coatings — Specialty Coatings

Other Specialty Coatings

Compatible Substrates & Surfaces

Plastics,

Wood

Cure Method

Radiation Cure

Coating Type

2K (2 component) Coating,

Radiation Curable Coating

Suggested Applications

Formulations with EBECRYL® 4141 can be used for- UV and EB curable, two-component polyurethane coatings- adhesion promoter in UV and EB curing coatings.

EBECRYL® 4141 can be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization andNCO/OH reaction).

The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods.

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Color	max. 150	Hazen	—
Density	approx 1.13	g/cm³	—
NCO Content	12.0 ± 1	%	—
Viscosity (25°C)	10000 ± 2500	mPa.s	—

Packaging & Availability

Regional Availability

• Africa
• Europe
• Middle East

Storage & Handling

Shelf Life

1 year

Storage and Handling

Storage in original sealed Allnex containers.Recommended storage temperature: -10 to 35°CProtect from intense radiation (light, UV), heat and foreign material. The product is sensitive to moisture. Skin formation may occur in openedcontainers. Allnex guarantees that for a period of 12 months following the day of manufacturing, the product will meet the specifications or values set for thin section “specifications or characteristic data” above, whatever is applicable, provided that the product is stored in full compliance with the storage conditions set for thin and referenced under section “storage” above and is otherwise handled appropriately. The lapse of the 12 months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Allnex recommend to test such a product if it still meets the specifications or the set values. Allnex does not make any guarantees regarding the product after the lapse of the 12 months period and Allnex shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 12months period.