Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
EBECRYL® 4513 is used to formulate flexible UV/EB energy curable coatings for application by roller coating, spraying, curtain coating and printing on wood, cork, furniture, paper, parquet, plastics, glass and films. EBECRYL® 4513 can alsobe used to formulate temporary (strippable) coatings.
Properties
- Physical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Acid Number | 1 | mgKOH/g | — |
Color | max. 100 | Pt-Co | — |
Density (20°C) | 1.15 | g/ml | — |
Flash Point | min. 100 | °C | — |
Functionality | 3.2 | — | — |
Hydroxyl Value | 0.1 | % | — |
Viscosity (23°C) | 25000 | cP/mPa·s | — |
Value | Units | Test Method / Conditions | |
Tensile Strength | 1015 (7.0) | psi (MPa) | — |
Elongation at Break | 30 | % | — |
Safety & Health
- Precaution
- Before using EBECRYL® 4513, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 2 years
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 451. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.
- Storage and Handling
- Storage in original sealed Allnex containers. Recommended storage temperature: - 10 to + 35°C- Protect from intense radiation (light, UV), heat and foreign material. Allnex guarantees that for a period of 24 months following the day of manufacturing, the product will meet the specifications or values set for this section “Specifications” or “Typical properties” above, whatever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section “storage”above and is otherwise handled appropriately. The lapse of the 24 months period does not necessarily mean that theproduct no longer meets specifications or the set values. However, prior to using said product, Allnex recommend to test such a product if it still meets the specifications or the set values. Allnex does not make any guarantees regarding the product after the lapse of the 24 months period and Allnex shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 24 months period.