Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Cure Method
- Coating Type
Properties
- Physical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Acid Number | 0.2 | mgKOH/g | — |
| Color | max. 200 | Pt-Co | — |
| Density (20°C) | 1.15 | g/ml | — |
| Flash Point | min. 100 | °C | — |
| Functionality | 3 | — | — |
| Hydroxyl Value | max. 0.1 | % | — |
| NCO Content | max. 0.2 | % | — |
| Viscosity (23°C) | 30000-50000 | cP/mPa·s | — |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | 80 | °C | — |
| Tensile Strength | 5800 (40) | psi (MPa) | — |
| Elongation at Break | max. 3 | % | — |
Safety & Health
- Precaution
- Before using EBECRYL® 4738, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 473. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.