Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 600/30 OT may be applied by lithographic, screen, gravure, direct or reverse roll, andcurtain coating methods.
EBECRYL® 600/30 OT is recommended for use in:- Overprint varnishes
- Screen inks and varnishes
- Coatings on wood, cardboard, chipboard and rigid plastics
- Paper upgrading
- Coatings where low residual odor is required.
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.13 | g/cm³ | — |
| Functionality (Theoretical) | 2 | — | — |
| Molecular Weight (Theoretical) | 500 | — | — |
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 2 | mgKOH/g | — |
| Color | max. 2 | Gardner | — |
| Viscosity (25°C) | ± 19000 | mPa.s | — |
Safety & Health
- Precaution
- The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. Consult the relevant Safety DataSheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.See Safety Data Sheet for emergency and first aid procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years after production date.