Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary resin solution of organic fatty acids, esters and wetting agents in aerosol propellant.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use
Thermoset Resins, Thermoplastics
Natural and Synthetic Rubber
Protective coating for metal molds
- Application Instructions
Aerosol: Clean molds thoroughly from wax build-up, residues and other contaminants. 2. Shake can well before use. 3. Hold can 10 inches from mold surface. Spray lightly moving north-south. After drying, spray east-west to insure complete coverage. Do not spray a heavy coat - a thin film is adequate and most efficient. 4. Demold one part, repeat thin film spray. 5. Demold as many parts as possible until one part demolds slightly harder than previous part. Then re-spray and mold.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Flash Point | Non Flammable | — | — |
Packaging | Aerosol | — | — |
Solids | max. 2 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year