Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty esters and wetting agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
- Phenolics / Phenolic Printing Boards
- Polyester / Vinyl Ester
- RTM & Compression Molding
- Application Method
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MOLD WIZ process aid additives are effective within a range of 1 to 10 parts per 1000 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may required a higher percentage of process aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100.0 | % | - |
Flash Point | 340 / 171 | °F/°C | - |
Refractive Index | 340 / 171 | - | - |
Solids | 100.0 | % | - |
Specific Gravity (25°C) | 0.88 | - | - |
Viscosity at 25°C | max. 15 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance