Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids and alkoxylated amine combined with wetting agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use
MMA Modified Polyester (Modar) Especially for Pultrusion
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin by weight, excluding reinforcements, pigments and fillers. High amounts of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100 | % | — |
Specific Gravity (25°C) | 0.95 | — | — |
Solids | 100 | % | — |
Refractive Index | 1.468 | — | — |
pH | 9 | — | — |
Flash Point (C.O.C) | min. 400ºF / min. 205ºC | °F/°C | — |
Viscosity (25°C) | 100 - 160 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year