Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic triglycerides of fatty acids combined with surfactants and wetting agents.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use Level
- 0.5 to 2.5 Parts Per 100 Resin
- Recommended Uses
- Polyester
- Vinyl Ester
- RTM, Hand lay-up/spray up and Filament winding.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz Process Aid Additives are effective within a range of 0.5 to 2.5 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. Always start an evaluation at a minimum of 1.0 part per 100 parts of resin (1.0%). High amounts of filler may require a higher percentage of process aid additive. Too much additive may affect the cure or physical properties.
Mixing:
Always incorporate the DLP-22E in to the mix after any low profile additives, and fillers. The LPA’s and fillers should be completely incorporated prior to adding the DLP-22E
Properties
- Compatible with
- MEKP Resins
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Flash Point (C.O.C) | Non-Flammable | °F/°C | - |
| Solids | Amber. | % | - |
| Specific Gravity (25°C) | 0.93 | - | - |
| Viscosity at 25°C | 50 - 150 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability