Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, and esters combined with neutralizing agent.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use
Polyester, Epoxy and Glass Fiber Processing. Recommended for solventless thin aliphatic amine cured systems Recommended for water-based polyester and epoxies cured with aliphatic polyamines, polyaminoamides and polyamides. Readily water soluble/dilutable
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MOLD WIZ Process Aid Additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Mixing: For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing.
Glass Fiber Processing: For optimum results evaluate experimentally in water solution(seizing) in the range of 0.5 – 10 %.
Veil Processing for release properties: Add 1% by resin weight that will be saturated on the weil.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Specific Gravity (25°C) | 1.06 | — | — |
Effective Ingredients | 100 | % | — |
pH | 10 | — | — |
Flash Point | Non Flammable | — | — |
Viscosity (25°C) | 300 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year