Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and amine combined with neutralizing agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use
Polyester Vinyl Ester Modar™ Pultrusion Hot Press Molding Resin Transfer Molding
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Mixing: Mix into the resin prior to addition of catalyst, fillers, and other resin additives.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100 | % | — |
Specific Gravity (25°C) | 0.948 | — | — |
pH | 7.5 | — | — |
Flash Point (C.O.C.) | 215 / 102 | °F/°C | — |
Viscosity (25°C) | 200 - 300 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year