Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and amine.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Use
Polyester Vinyl Ester
Pultrusion DAP Resin
Phenolic
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 0.75 to 2.0 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. Always start an evaluation at 1 part per 100. High amount of filler may require a higher percentage of process aid additive. Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst
Mixing: To minimize air entrapment and assure easiest most through mixing, Axel recommends incorporating the filler with the resin, followed by addition of the process aid additive, catalyst, initiators and other materials.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100 | % | — |
| Specific Gravity (25°C) | 0.964 | — | — |
| pH | 4.5 | — | — |
| Flash Point (C.O.C.) | 370 / 189 | °F/°C | — |
| Viscosity (25°C) | 280 - 480 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year