Products

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaflow® LCP MX130 is an LCP reinforced with 30% short glass fiber / mineral mixture with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

PEEK, unreinforced

BARLOG plastics GmbH Kebaflow® LCP HF140 is an LCP reinforced with 40% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

POM copolymer unreinforced, medium viscosity, UV stabilized

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

PPS-GF40, cross-linked PPS, 40% glass fiber reinforced, hydrolysis stabilized, improved flowability

KEBAPEAK XS 2800 is an unreinforced, highly viscous PEEK grade that is filtered to achieve a particularly high level of purity. In addition to injection molding applications with high purity requirements, the material is particularly suitable for thin-walled extrusion applications such as Cable sheathing.

PEEK-GF30, PEEK, 30% glass fiber reinforced

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

BARLOG plastics GmbH Kebaflow® LCP HF130 is an LCP reinforced with 30% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

linear PPS, 30% glass fiber reinforced, impact resistant

PPS, linear, unreinforced, impact modified

PEEK-CF20, PEEK; 20% carbon fiber reinforced

PPS-GF40, linear PPS, 40% glass fiber reinforced, hydrolysis stabilized

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

KEBAPEAK FE 150304 is a sliding and wear-optimized high-performance compound based on PEK (polyether ketone) with excellent wear resistance at high temperatures and high surface pressure.

Plain bearing material based on PPS, PPS + carbon fiber + graphite

PPS-CF, PPS carbon fiber reinforced

BARLOG plastics GmbH Kebaflow® LCP MF130 is an LCP reinforced with 30% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

linear PPS, 20% glass fiber reinforced, laser weldable, natural

linear PPS, 30% glass fiber reinforced, impact resistant, hydrolysis stabilized

PPS-GF / MD 65, linear PPS, 65% glass fiber / mineral hybrid reinforced

PEEK-GF20, PEEK, 20% glass fiber reinforced

PEEK-X30, tribologically modified

PPS-GF / MD 65, cross-linked PPS, 65% glass fiber / mineral hybrid reinforced

PPS-GF40, linear PPS, 40% glass fiber reinforced

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

PPS-GF40, cross-linked PPS, 40% glass fiber reinforced, hydrolysis stabilized