Products

BARLOG plastics GmbH Kebaflow® LCP MX130 is an LCP reinforced with 30% short glass fiber / mineral mixture with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

PPS functional compound for the production of plastic-bonded magnets

PPS functional compound for the production of plastic-bonded magnets

PPS functional compound for the production of plastic-bonded magnets

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

BARLOG plastics GmbH Kebablend® / MW 39.1500 PPA is a product based on PPA for the production of soft magnetic components. The achievable permeability is approx. 60 (at 1 MHz) and the saturation flux density is approx. 430 mT.

PEEK, unreinforced

BARLOG plastics GmbH Kebaflow® LCP HF140 is an LCP reinforced with 40% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

PPS functional compound for the production of plastic-bonded magnets

KEBABLEND / TC FE 140203/1 PPS is a functionalized compound based on PPS with increased thermal conductivity.

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

PPS-GF40, cross-linked PPS, 40% glass fiber reinforced, hydrolysis stabilized, improved flowability

KEBAPEAK XS 2800 is an unreinforced, highly viscous PEEK grade that is filtered to achieve a particularly high level of purity. In addition to injection molding applications with high purity requirements, the material is particularly suitable for thin-walled extrusion applications such as Cable sheathing.

KEBABLEND / H 36.1900 PPS is a functional compound based on PPS with high density.

KEBABLEND / TC FE 190106 PPS is a special compound based on PPS, which is thermally conductive and not electrically insulating.

PPS functional compound for the production of plastic-bonded magnets

PEEK-GF30, PEEK, 30% glass fiber reinforced

BARLOG plastics GmbH Kebablend® / WR 07/1130/2115 is a tribologically modified special compound based on PPS that combines high strength with good sliding behavior and high wear resistance, even at elevated temperatures.

PPS-GF40, cross-linked PPS, 40% glass fiber reinforced

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

BARLOG plastics GmbH Kebablend® / MW FE 161001 PPS is a development product based on PPS for the production of soft magnetic components. The achievable permeability is approx. 10 (at 1MHz).

BARLOG plastics GmbH Kebaflow® LCP HF130 is an LCP reinforced with 30% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

linear PPS, 30% glass fiber reinforced, impact resistant

PPS, linear, unreinforced, impact modified

PEEK-CF20, PEEK; 20% carbon fiber reinforced

PPS-GF40, linear PPS, 40% glass fiber reinforced, hydrolysis stabilized

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

KEBAPEAK FE 150304 is a sliding and wear-optimized high-performance compound based on PEK (polyether ketone) with excellent wear resistance at high temperatures and high surface pressure.

Plain bearing material based on PPS, PPS + carbon fiber + graphite

PPS-CF, PPS carbon fiber reinforced

BARLOG plastics GmbH Kebaflow® LCP MF130 is an LCP reinforced with 30% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

linear PPS, 20% glass fiber reinforced, laser weldable, natural

linear PPS, 30% glass fiber reinforced, impact resistant, hydrolysis stabilized

PPS-GF / MD 65, linear PPS, 65% glass fiber / mineral hybrid reinforced

PEEK-GF20, PEEK, 20% glass fiber reinforced