Products

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PBT unreinforced, flame retardant

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM copolymer unreinforced, medium viscosity

POM copolymer unreinforced, medium viscosity, UV stabilized

PBT unreinforced, highly impact modified

PBT-GF30, PBT, 30% glass fiber reinforced

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT unreinforced, injection molding type, approved for use in contact with food

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

PBT-GF20, PBT, 20% glass fiber reinforced

KEBABLEND / TC FE 181003 PBT is a special compound based on PBT, which is thermally conductive and electrically insulating.

PBT unreinforced, injection molding type, low viscosity

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT + PCT, unreinforced, increased heat resistance, impact modified

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

PBT-M40, PBT, 40% mineral

KEBABLEND / TC FE 190106 PPS is a special compound based on PPS, which is thermally conductive and not electrically insulating.

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

PBT + PET, 30% glass fiber reinforced gray, suitable for contact with food (EU)

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant

PBT-GF15, PBT, 15% glass fiber reinforced

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

PBT-GB30, PBT, 30% glass balls

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.