Products

Lutensol® AO 3 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 3 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 70 is a 100% active product suitable for machine and manual floor cleaning as a low-foaming degreasing agent. It is readily biodegradable, has a lower tendency to form gel compared to longer-chain alcohol ethoxylates, and is listed on Safer Choice. The final surfactant choice, however, would be formulation-dependent.

Lutensol® XL 80 is a 100% active product. It has very fast dynamics and excellent detergency on oily soils. Even when used at low levels, it can boost the degreasing power of the detergent without reducing the foam. It has a lower tendency to form gel compared to longer-chain alcohol ethoxylates.

Glucopon® 425 N is a mid-chain APG surfactant with moderate hydrotrope ability and high foam with good primary cleaning properties that is 100% derived from renewable resources. It has excellent gloss retention, low to no streaking, and excellent plastic compatibility, and won't damage even floor finishes. Furthermore, it is stable at high alkaline conditions and is an excellent option for wetting, although a defoamer may need to be used.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Pluronic® 17R2 is a 100% active product and is suitable for use as a foam controlling agent in machine floor cleaning applications, such as in food and beverage processing, institutional cleaning, and sanitation. Its benefits include foam control, lubrication, and low foam detergency.

Dehypon® GRA is a low foam surfactant specifically designed for powder and solid formulations. It exhibits excellent wetting behavior that allows for a "detergent plus rinse aid claim," making it suitable for use in both the wash and rinse cycles.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Lutensol® XP 80 is a 100% active product with very fast wetting and effective cleaning. It is readily biodegradable and has a lower tendency to form gels compared to longer-chain alcohol ethoxylates. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List. The final surfactant choice would be formulation-dependent.

Good performance for cleaning and foam control. Suitable for high-temperature cleaning (greater than 60°C). The cloud point is 30°C, so it has very low foaming above that temperature, which is ideal for carpet extraction operating temperatures (typically 35 to 50°C). Listed on the EPA's Safer Chemical Ingredients List, it is a low-foaming fatty alcohol EO/PO derivative.

Lutensol® AO 8 is a nonionic surfactant with approximately 100% activity, based on C13C15 oxo alcohol with 8 moles of ethylene oxide and consisting of about 67% C13 and 33% C15. It is a high-performance surfactant with low toxicity, providing excellent emulsification, dispersion, wetting, and compatibilizing properties.

Dehydol® 100 Liquid 90% is an alkyl polyethylene glycol ether made from C12–C18 alcohol and contains 9 moles of ethylene oxide. It is 90% active and available as a liquid at room temperature, with a cloud point of 80°C. Due to its wetting and emulsifying power, it's used in all kinds of household and institutional cleaners.

Lutensol® XL 100 is a synthetically derived, readily biodegradable C10 guerbet alcohol alkoxylate POE (10) with 100% active content. This product is a highly effective solubilizer and offers excellent emulsification properties. It complies with the requirements of Regulation (EC) No 648/2004 on detergents and has been tested for biodegradability and emulsifying properties according to the methods listed in Annex III.

Lutensol® AO 7 is a nonionic surfactant, approximately 100% active, that is based on C13C15 oxo alcohol with 7 moles of ethylene oxide that consists of ca. 67% C13 and ca. 33% C15. It is a high-performance surfactant with low toxicity. It also offers great emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 50 is an excellent wetting agent composed of C10 Guerbet Alcohol Ethoxylate POE (5) with 100% active content. It is a highly effective substitute for NP-6. The product is synthetically derived and readily degradable. Lutensol® XP 50 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Lutensol® XP 30 is a dynamic wetting agent with a C10 Guerbet Alcohol Ethoxylate POE (3) composition and 100% active content. It is synthetically derived and readily degradable. This product is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Dehypound® M is a high-performance, sustainable non-ionic surfactant blend that offers versatility for multiple soils and applications in Home Care, I&I, and car wash cleaners. Its powerful cleaning capabilities without the use of solvents, combined with its low film and streak performance, make it an ideal choice for hard surface cleaners. Furthermore, its foam profile enables a variety of formulation options and dispensing possibilities, while also helping simplify your ingredient portfolio by eliminating the need for solvents and additional hydrotropes in your finished formulation.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Pluronic® N3 is a 100% active product suitable for low temperature commercial dishwashing machines. It provides excellent defoaming and wetting, with a low foaming surfactant and a cloud point of 28°C. It has very good synergy with Plurafac SLF 180 when used as a rinse aid in a low temperature dishwashing machine and is listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Demelan® VPC is a thickener for acidic systems that is highly effective on mineral acids, has shown excellent primary cleaning on certain soils, and mixes into solution up to three times faster than other competitive thickeners, providing improved processing time. It is also compatible with all types of anionic, cationic, and amphoteric surfactants.

Lutensol® XL 79 is an easy-to-handle wetting agent and emulsifier with a C10 guerbet alcohol alkoxylate POE (7) composition and 85% active content. It provides enhanced performance compared to IDA. This product is synthetically derived and readily degradable. Lutensol® XL 79 is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Plurafac® LF-224 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Inoterra™ DWE is a clear liquid of 85% concentration, which utilizes the synergy between natural alcohol ethoxylates and 2-PH surfactants. Water is present to provide better phase stability. It has a cloud point of 53°C and an HLB of 12.4. It is listed on Safer Choice, although the final surfactant choice depends on the formulation.

Dehypon® LS 24 is a low-foaming non-ionic surfactant. It is an EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum. It appears as a yellowish liquid, clear to slightly cloudy at room temperature.

Dehypon® LT 104 is a low-foaming surfactant with marked wetting power. It can be used in low-foaming industrial cleaners, machine-dishwashing agents, and formulations based on sodium hydroxide or phosphoric acid where conventional fatty alcohol polyglycol ethers are not sufficiently stable during storage.

Lutensol® TO 7 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 7 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 7 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Pluronic® 25R2 is a 100% active product suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties and is heavily used in the industry as a rinse aid for low-temperature commercial dish machines. It is also suitable for machine floor cleaning as a foam controlling agent.