Products

Eumulgin® B 2 Flex is a universally applicable, non-ionic emulsifier that is used for the manufacture of cosmetic oil-in-water emulsions. It is supplied in white to slightly yellowish pellets and is primarily used in skin care and hair and scalp care products.

Emulgade® PL 68/50 is a very mild cream base having the same lamellar structure found in the skin’s lipids. Based on alkyl polyglucoside (APG), this emulsifier is perfectly suited for creamy lotions and gels in all skin care applications. In fact, many of the most effective solutions support the skin’s natural functions. Among consumers, gentle and nature-based skin care products are in demand, as they know that nature knows best. This product is derived from 100% natural and renewable feedstocks, does not contain preservatives, and is suitable for EO-free solutions. It is approved by COSMOS, NATRUE, ECOCERT, and BDIH.

Emulgin® O 30 is a nonionic emulsifier that is suitable for skin and hair care applications. It is available as pellets or powder and has a faint, characteristic odor. This emulsifier has benefits for skin care, hair care, and scalp care.

Cutina® PES builds up good viscosity and stability of an o/w emulsion with different emulsifier systems (ionic and non-ionic), while at the same time creating a non-waxy and caring skin feel. It comes in off-white, wax-like pellets with a little intrinsic odor, and the consistency of wax with sensorial properties. This product is ideally used for body care, face care, sensitive skin, and baby care applications.

Kolliphor® CS 12 is a white, wax-like mass with a mild odor, delivered in pellets. The product can be universally applied as a non-ionic emulsifier for pharmaceutical O/W emulsions.

Cutina® CP is a cetyl palmitate fatty acid ester for use as an emollient. It is a consistency wax used for viscosity adjustment in O/W emulsions. It is used in baby care and cleansing products, antiperspirants and deodorants, body care, face care, etc.

Kollicoat® SR 30 D is an aqueous dispersion with a solids content of 30%. The low viscosity product has a weak characteristic odor and a milky white or slightly yellowish appearance. The dispersion consists of about 27% polyvinyl acetate, 2.7% povidone and 0.3% sodium lauryl sulfate. Kollicoat® SR 30 D is miscible with water in any ratio while retaining its milky-white appearance. Mixing the product with ethanol or isopropyl alcohol in a 1:5 ratio produces a slightly turbid and somewhat viscous solution, a solution in acetone is more turbid. On addition of further organic solvents the polymer precipitates out but then dissolves when further solvent is added. It is insoluble in dilute alkaline or acidic solutions.

Eumulgin® B 2 is a universally applicable, non-ionic emulsifier for cosmetic oil-in-water emulsions. It appears as a white to slightly yellowish solid or pellets composed of ethoxylated cetyl- and stearyl alcohols. It can be used in after sun products, antiperspirants and deodorants, baby care and cleansing, body care, color care, conditioning, and face care.

Kollicoat® Smartseal 100 P is a spray dried powder of a methyl methacrylate (MMA)and diethylaminoethyl methacrylate (DEAEMA) copolymer. The molar ratio of the monomers MMA and DEAEMA in the copolymer is 7:3. The powder contains approx. 2% macrogol cetostearyl ether and approx. 2.5% sodium lauryl sulfate. It is white and has a pleasant characteristic odor.

Emulgade® NLB is a well-balanced, robust, nonionic cream base that is suitable for low pH values, low viscosities, and high levels of electrolytes, like in AP/deo roll-ons and O/W lotions. It is supplied in white, colorless, wax-like pellets with a faint, characteristic odor.

Eumulgin® EO 33 is a polyethylene glycol distearate that acts as a solubilizer for some oils and fatty materials. This material is well known for its thickening abilities in some formulations, particularly those based on amphoterics and soaps. It is supplied as white to yellowish pellets.

Emulgade® 1000 NI Flex is a versatile self-emulsifying, nonionic cream base with excellent emulsification properties. It is suitable for a wide range of oil-in-water emulsion formulations, including those for skin care, sun care, mother and baby, hair care, shampoo, conditioner, bath and body, men's care, and self-tanning products.

Kollidon® CL Crosslinked Polymer is supplied as fine white or almost white powder. It has a slight characteristic odor and is practically tasteless. It is insoluble in all of the usual solvents.

Pluracare® F127 NF Prill FLEX has guaranteed low 1,4-dioxane levels to support formulators in meeting new regulatory limits. Pluracare® F127 NF Prill FLEX is a block co-polymer with an average molecular weight consists of propylene oxide and ethylene oxide. It is used as a thickener, gelling agent, co-emulsifier and bodying agent in toothpastes, mouthwashes, creams and liquid emulsions.

Eumulgin® B3 is a universally applicable, non-ionic emulsifier for cosmetic oil-in-water emulsions. It is suitable for a variety of personal care applications including face care, body care, hair care, and sun care. It is supplied in the form of white to slightly yellowish pellets.

Eumulgin® S 21 is a non-ionic emulsifier that is used for manufacturing various O/W emulsions for skin care applications. It is especially suitable for producing O/W anti-perspirant roll-ons and is available in the form of white pellets with a faint characteristic odor. This emulsifier has benefits for skin care.

Lanette® 18 is a hydrophilic waxy substance that is derived from stearyl alcohol and is used to regulate the viscosity in oil-in-water emulsions. It comes in the form of white to light yellowish pellets or flakes, and is beneficial for both skin care and hair and scalp care products.

Kollidon® VA 64 is a white or slightly yellowish, free-flowing powder with a faint characteristic odor and practically no taste. It readily dissolves in all hydrophilic solvents. Solutions of more than 10 % concentration can be prepared in water, ethanol, isopropanol, methylene chloride, glycerol and propylene glycol. It is less soluble in ether, cyclic, aliphatic and alicyclic hydrocarbons.

Dehymuls® E is a mixture of higher molecular fatty acid esters, fatty acid salts, and oil binding additives. It is a W/O cream base suitable for various W/O skin care emulsions. It is supplied as yellowish, wax-like pellets with an inherent odor.

Lanette® SX is a cream base for cosmetic oil-in-water emulsions used for skin and hair care. It is self-emulsifying and anionic in nature, and is an alternative to stearate-based cream bases. It is composed of a mixture of cetylstearyl alcohol and an anionic emulsifier, and appears as white pellets with a faint intrinsic odor.

Kollidon® SR is a mixture of 80% of polyvinyl acetate and 19% povidone (Kollidon® 30) in a physical mixture. Approximately 0.8% of sodium lauryl sulfate and about 0.2% of silica are used as stabilizers. It is supplied as slightly yellowish, free-flowing powder. Kollidon® SR Polymer is insoluble in water and very soluble in N-methylpyrrolidone.

Cetiol® MM is a waxy emollient with consistency giving properties, and it is suitable for use in all skincare formulations. It is a white to light yellowish pelletized wax mass with a distinctive odor. This product is suitable for use in skin care, cleanser, sun care, mother and baby, bath and body, face care, and self-tanning applications.

Cegesoft® HF 52 is a hydrogenated vegetable oil that modifies the rheological properties of emulsions. It is supplied in beige pellets with a bland odor. Its applications include skin care, sun care, mother and baby products, bath and body products, and face care.

Kollicoat® Smartseal 30 D is insoluble in water (neutral pH) and dissolves quickly under protonation at pH-values of 5.5 and below due to the defined number of basic functional groups. It is a co-polymer comprising methyl methacrylate (MMA) and diethylaminoehtylmethacrylate (DEAEMA) in the ratio 6:4. Kollicoat Smartseal 30 D is an aqueous polymer dispersion (latex) with a faint characteristic odor. It contains approx. 0.6 % macrogol cetostearylether 20 and approx. 0.8% sodium laurylsulfate.

Pluracare® F 127 Prill is a block co-polymer that functions as a thickener, gelling agent, co-emulsifier, and bodying agent in toothpastes, mouthwashes, creams, and liquid emulsions. It is mainly used in skin care, oral care, hair, and scalp care formulations.

Emulgade® F is an anionic self-emulsifying cream base for various O/W emulsions, including hair coloring. This product is suitable for low-viscosity systems. Its consistency-giving properties make it suitable for the preparation of cosmetic oil-in-water creams and lotions. It is a white to slightly yellowish product with a faint characteristic odor that is supplied in pellets.

Pluracare® F 127 NF Prill is a copolymer of ethylene oxide and propylene oxide and has the general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. This product has an average molecular weight of 12,600, a viscosity of 3,100 cP, and a pour/melt point of 56°C.

Cegesoft® HF 62 is a hydrogenated vegetable oil that can modify the rheological properties of emulsions. This ingredient is primarily composed of hydrogenated vegetable oils and appears as beige pellets with a bland odor. It is a versatile ingredient that can be used in various product categories, including after-sun formulations, baby care and cleansing products, body care, color care, face care, face cleansing, and self-tanning products.

Eumulgin® BA 10 is a non-ionic emulsifier that is universally applicable in the manufacturing of oil-in-water emulsions for cosmetic and pharmaceutical applications. It is available in the form of white pellets or as a waxy solid. This emulsifier has benefits for both skin care and hair and scalp care.

Emulgade® 1000 NI is a universal, self-emulsifying non-ionic cream base suitable for many skin and hair care applications. It is compatible with anionic and cationic ingredients, and is excellent for creating O/W emulsions containing difficult-to-emulsify actives. This flexible, easy and cost-efficient self-emulsifying O/W cream base is a great choice for formulators.

Dehyquart® F 75 T is a quaternary compound of conditioning and emulsifying ingredients. This product is suited for the preparation of hair conditioning creams and emulsions. Its typical application concentrations are 2 - 5%. Due to the high content of quaternary ammonium salt, the addition of further consistency giving factors like, e.g., Lanette® O, is recommended. Dehyquart® F 75 T is a white to yellowish wax-like product that is supplied in pellets. It has a cationic surfactant (MW 800) of 65 - 72%, an acid value of 5 - 12, a pH value (5%) of 2.0 - 3.5, and a color gardner of 0 - 4. The most favorable conditioning and stability properties are obtained in a pH range of 3 - 5.

Emulgade® 165 is a nonionic self-emulsifying cream base for various skin care applications. It is a standard, all-purpose, O/W cream base that is supplied in white to slightly yellow pellets with a characteristic odor. It is particularly useful for hair and scalp care formulations.

Kollicoat® MAE 100-55 is a white redispersible powder with a faint characteristic odor. The product contains 0.7% sodium lauryl sulfate (USP) and 2.3% Polysorbate 80 (Ph. Eur.) as emulsifying agents. The fatty acids used in the manufacture of Polysorbate 80 are of vegetable origin. Kollicoat® MAE 100-55 is a weakly acidic copolymer that dissolves at a pH above 5.5. Kollicoat® MAE 100-55 dissolves in methanol and ethanol to yield clear to slightly cloudy solutions. It is also soluble in dilute alkaline solutions.

Dehyquart® C 4046 is an economic and mild self-emulsifying conditioner base with an outstanding performance profile. It is a ready-to-use product that does not contain solvents. Dehyquart® C 4046 has excellent dermatological compatibility and is non-irritating to eyes and skin. It is classified as "readily degradable" according to OECD Method 301, and the typical application concentrations range from 4 to 8%, depending on the desired viscosity of the final product.

Emulgade® SE-PF is a self-emulsifying base with consistency-giving properties, suited for the preparation of cosmetic and pharmaceutical oil-in-water creams and lotions. It has high emollient flexibility and good electrolyte stability. It is a mixture of consistency-giving factors and nonionic emulsifiers, appearing as white to slightly yellowish pellets with a faint characteristic odor.

Lanette® 14 is a myristyl alcohol used for viscosity regulation in cosmetic O/W emulsions. It comes in hydrophilic waxy pellets or flakes, and is suitable for a variety of applications, including skin care, cleanser, sun care, bath and body, men's grooming, and self-tanning.