Products

TC-5060 A/B is a room temperature, addition/platinum curing silicone rubber designed for: •Mold making •Encapsulation applications •Pressure pads •Gaskets •Casting low-melt metals into •Varioustypes of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC-5045 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is anexcellent mold material for casting rigid and flexible urethane systems. It may also be used as a mold making material for casting low melting metals in continuous operations to 650F (344°C) and sporadic applications of 850F (454°C). TC-5045 A/B has proven to be less inhibited in its cure than standard platinum based silicones. It has a very favorable CTE for heat expandable mandrels used in composite tooling.

TC-5005 A/B is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 40-60 minute work time with 16-24 hour demold time. If a softer product is required, refer to the TC-5005 A/B-C data bulletin. TC-5005 “C” can be added to extend the elongation andreduce thehardness of the TC-5005 A/B.

TC-5061 A/B is a room temperature, addition/platinum curing silicone rubber designed for: •Mold making •Encapsulation applications •Pressure pads •Gaskets •Casting low-melt metals into •Varioustypes of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC-5040 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. When this rubber is used to make certain types of molds, it is translucent enough to see through when casting into the mold cavity.

TC 5005 A/B-C is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 1.5-2 hour work time with 16-24 hour demold time.

TC-5041 A/B is a high tear strength, addition/platinum, room temperature curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals. With the use of talc powder as an interface the TC-5041 A/B has been used with cast metal temperatures running 650°F (344°C). With the ability to withstand high temperatures the TC-5041 A/B works very well as a mask for metal spraying and welding operations.

TC-5050 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals into. With the use of talc powder as an interface the TC-5050 A/B has been used in production with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C)for making a limited number of casts. With the ability to withstand high temperatures the TC-5050 A/B works very well as a mask for metal spraying and welding operations.

TC-5024A/B is a two-component, room temperature curing silicone elastomer. This system is designed primarily for making molds, but is also used for gaskets as well as a wide variety of parts. This product is a condensation cured system using a tin catalyst that provides a 30-minute work time with a 4-6 hour demold time.

TC-5030 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. You can see through molds made from this material when casting into it.