Products

Dispelair® BS 89 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Cylcon 666 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® SE 101F is used to control the foam produced in the washing and processing of vegetables. This foam is stabilized by the sugars and starches present in the process water.

Dispelair® CF 937 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 145 is a foam control agent for decorative emulsion paints and has high dispersibility in all interior paints.

Dispelair® CF 219 is a highly effective foam control agent for aqueous adhesives and for very foamy systems.

Dispelair® CF 898 is a foam control agent for decorative emulsion paints. It has good cost performance and dispersibility.

Dispelair® DP 948 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Dispelair® CF 407 is a foam control agent for inks and decorative emulsion paints. It is very effective in all interior paints and has good dispersibility.

Dispelair® DP 131 is a defoamer for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® DP 510 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BT 224 is a foam control agent for sugar processing used in Sugar beet washing/ transport.

Dispelair® DP 362 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 393 is a modified silicone-based foam control agent that is particularly effective in HPEG based systems. It is highly effective, particularly in HPEG PCE production & is SVHC label free.

Dispelair® DP 906 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Dispelair® DP 600 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® Cyllube 102 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 710 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® Cyltac 160 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 763 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 57 is a bio-based foam control agent specially formulated from renewable sources such as natural oil.

Dispelair® DP 592 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 421 is a foam control agent for inks and decorative emulsion paints. It has high dispersibility for low PVC systems.

Dispelair® CF 546 is a defoamer designed to combat foam generated in the jet dyeing processes at high temperatures, pressures and ensure even dyeing of the textile fabric.

Dispelair® DP 336 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 617 is a highly effective foam control agent for inks and requires high shear incorporation.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 333 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 792 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® P 864 is a foam control for the construction industry having the benefits of lower unit cost & used for general purpose.

Dispelair® BT 184 is a foam control agent for sugar processing used in Sugar beet washing/ transport.

Dispelair® BS 65 is a pulp silicone free defoamer which has been developed for sensitive systems where pulp cleanliness is paramount and the pulp must remain free of any silicone contamination.