Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- High tensile strength
- Extremely low color
- Superior hardness
- Low heat generation
- Excellent adhesion to plastics
- High Tg
Applications & Uses
- Markets
- Base Chemicals End Uses
- Recommended Application
- Wood coatings
- Rigid plastic coatings
- Hard gel nail coatings
- Rigid 3D printing resins
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (60 °C) | 65,000 | cP | — |
| Pt-Co Color (APHA) | 25 | — | — |
| Pt-Co Color | 25 | APHA | — |
| Refractive Index (25°C) | 1.496 | — | — |
| Density (25°C) | 1.110 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Test Formulation Name I30 I50 TM50 TP50 H50 HE30 BR-371MS
70 50 50 50 50 70 IBOA 30 50 TMPA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad™ 184
2 2 2 2 2 2 Viscosity, 25°C (CAP2000+) 33,000
2.800 11.000 900 400 5.300 Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, (psi, ASTM D882) 9.800 9.700
9.100
7.800
7.700
9.700 Elongation (%, ASTM D882) 4.6 4.4 3.6 5.6 3.4 6.4 Elastic Modulus (ksi, ASTM D882) 370
360
370
310
310
390
Durometer Hardness 89D
87D 91D
86D
86D 90D
Water Absorption, %(24 hrs)
0.20 0.18 0.4 0.35 0.25 0.80 MEK Double Rubs (#) >200 105 >200 >200 >200 >200 Tg(DMA) =110°C; Peak tan delta; cured with 2 phr of Irgacure® 184 Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 Aluminum XXX XX XXX XXX Cold Rolled Steel Glass HDPE PET XXX XXX XXX XX XXX XXX PMMA X XXX XXX XXX XXX Polycarbonate XX XX XXX XXX XXX X PVC XXX XXX XXX XXX XXX XXX Stainless Steel X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.