Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Base Chemicals Features
- CASE Ingredients Features
- Features
- High tensile strength
- Excellent optical clarity
- Exhibits hydrolytic stability
- Good impact resistance
- Improves adhesion
- Provides weatherability
- Low skin sensitivity
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- Optically clear coatings
- Tough 3D printing resins
- Plastic-bonding adhesive
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.05 | g/cm3 | — |
| Refractive Index (at 25°C) | 1.48 | — | — |
| Viscosity (at 60°C) | 4900 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 2,200 3,000 5,400 1,500 3,300 3,500 Elongation, %** 100 130 5.2 6.3 6.4 110 Elastic Modulus, ksi* 15 65 190 55 110 70 Durometer Hardness 55D 720 85D 710 74D 700 Water Absorption, % (24 hrs) 0.58 0.33 0.76 0.81 0.63 2.53 MEK Double Rubs (#) 20 9 >200 16 160 14 Tg(DMA)=50°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Typical Formulations
Test Formulation Name 130 160 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 6,400 1,000 4,400 1,100 500 2,600 * Brookfield – CAP 2000+ @ 25°C.
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS * Aluminum * ** Cold Rolled Steel * ** Glass * HDPE PET *** ** *** ** PMMA *** * Polycarbonate ** ** ** *** *** Polypropylene PVC ** ** *** ** ** * Stainless Steel *** * * Recommended ** Highly Recommended *** Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type