Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Imparts toughness and impact resistance
- Adheres to polymer films
- Low Tg
- Elastomeric
- Excellent adhesion to a variety of substrates
- Provides abrasion resistance
- Excellent cure response in LED conditions
- Excellent weatherability
Applications & Uses
- Recommended Application
- Impact resistant coatings
- Thermoforming coatings and inks
- Nail gel coatings
- High impact 3D printing resins
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Viscosity (60 °C) | 88,000 | cP | — |
Pt-Co Color | 15 | APHA | — |
Refractive Index (25°C) | 1.549 | — | — |
Density (25°C) | 1.160 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Test Formulation Name I30 I50 TM50 TP50 H50 HE30 BR-7432GB
70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad™ 184
2 2 2 2 2 2 Viscosity, 25°C (CAP2000+) 65.000
6.900 22.000 6.700 2.800 11.000 Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, (psi, ASTM D882) 1.400
2.400
3.300
1.400
1.900
400 Elongation (%, ASTM D882) 190 190 4.0 19.0 9.0 230 Elastic Modulus (ksi, ASTM D882) 3.2
8.2
110
25
45
1.3 Durometer Hardness 65A
43D 78D
56D
63D 57A
Water Absorption, %(24 hrs)
1.04 0.62 0.84 1.01 0.75 3.38 MEK Double Rubs (#) 180 17 >200 143 140 40 Tg(DMA) = -4°C; Peak tan delta; cured with 2 phr of Irgacure® 184 Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS XX X XXX XX XXX XX Aluminum Cold Rolled Steel X Glass HDPE PET XX XXX XXX XX XXX XX PMMA X X X XX XXX X Polycarbonate XX XXX XX XX XXX PVC X XXX XXX Stainless Steel X X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irrit ation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.