Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Fast Cure Response
- Provides Hardness
- Oil & Chemical Resistant
- Non-Yellowing
- Imparts Scratch Resistance
- Improves Abrasion Resistance
- Exhibits Hydrolytic Stability
- Gloss Finish
- Improves Weatherability
Applications & Uses
- Applications
- Recommended Application
- Coatings for Wood
- Plastic Hard Coatings
- Floor Coatings
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (50 °C) | 25,000 | cP | — |
| Pt-Co Color (APHA) | 30 | — | — |
| Pt-Co Color | 30 | APHA | — |
| Refractive Index (25°C) | 1.496 | — | — |
| Density (25°C) | 1.20 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS Aluminum X X Cold Rolled Steel
X XX X XX X Glass X HDPE PET PMMA Polycarbonate XXX X X XXX Polypropylene PVC Stainless Steel X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 4,400 400 2,600 400 120 - * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
3,300 2,500 930 2,100 1,700 - Elongation, 6** 7 5 1 2 2 - Elastic Modulus, ksi*
270 95 190 230 180 - Durometer Hardness
92D 90D 92D 91D 90D - Water Absorption, 96 (24 hrs)
- - - - - - MEK Double Rubs (#)
>200 >200 >200 >200 >200 - Tg(DMA)= >200°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.