Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Base Chemicals Features
- CASE Ingredients Features
- Features
- Excellent plastic adhesion
- Optically clear and nonyellowing
- Excellent hydrophobicity
- Low water absorption
- Imparts toughness
- Glossy finish
- Provides abrasion resistance
- Good dimensional stability
- Tin Free
- INCI Listed
- Abrasion Resistance
- Flexibility
- Weatherability
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- Tough 3D printing resin
- Impact resistant coatings for plastics
- Moisture-sensitive coatings and adhesives
- Ideal for tough
- Impact-resistant 3D printing resins
- Excellent hydrophobicity
- Low water absorption
- Optically clear and non yellowing
- Provides abrasion resistance and toughness
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 25°C) | 1.09 | g/cm3 | — |
Durometer Hardness | 81D | — | — |
Elongation at Break | 50 | % | — |
Nominal Viscosity (at 25°C) | 4700 | cP | — |
Nominal Viscosity (at 25°C) | 5500 | cP | — |
Refractive Index (at 25°C) | 1.485 | — | — |
Tensile at Break | 23 | MPa | — |
Glass Transition Temperature (DMA) | 58 | °C | — |
Viscosity (at 60°C) | 4700 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 3,400 4,400 6,800 4,100 5,400 2,400 Elongation, %** 50 11 2.7 11.8 7.3 80 Elastic Modulus, ksi* 190 250 310 170 180 100 Durometer Hardness 810 820 900 810 830 65A Water Absorption, % (24 hrs) 0.18 0.14 0.28 0.33 0.26 2 MEK Double Rubs (#) 32 14 >200 34 128 6 Tg(DMA)=58°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Typical Formulations
Test Formulation Name 130 160 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 5,500 900 4,000 900 400 1,800 * Brookfield – CAP 2000+ @ 25°C.
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS *** *** *** *** *** * Aluminum Cold Rolled Steel
Glass HDPE ** PET *** *** *** *** ** *** PMMA * *** *** *** *** Polycarbonate *** *** *** *** *** Polypropylene PVC *** *** *** *** *** Stainless Steel ** * Recommended ** Highly Recommended *** Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type