Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Features
- Relative hardness with flexibility
- Nonyellowing
- Excellent hydrophobicity
- Low water absorption
- Increases weatherability
- Provides abrasion resistance
- Gloss finish
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- Coatings and inks for plastics
- Tough 3D printing resins
- Impact-resistant plastic coatings
- Moisture-sensitive coatings and adhesives
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.11 | g/cm3 | — |
| Refractive Index (at 25°C) | 1.49 | — | — |
| Viscosity (at 60°C) | 8200 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 2,900 3,000 5,100 2,500 3,200 3,400 Elongation, %** 80 70 34 7.1 5.9 100 Elastic Modulus, ksi* 50 140 220 80 110 55 Durometer Hardness 720 80D 88D 77D 80D 73D Water Absorption, % (24 hrs) 0.35 0.21 0.38 0.54 0.34 1 MEK Double Rubs (#) 23 7 >200 21 51 16 Tg(DMA)=66°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS *** * *** *** Aluminum Cold Rolled Steel
Glass HDPE PET *** ** *** *** *** *** PMMA *** ** *** Polycarbonate * ** *** *** *** Polypropylene PVC ** ** *** *** *** * Stainless Steel * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
Test Formulation Name 130 160 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 8,100 1,000 5,100 1,000 400 2,300 * Brookfield – CAP 2000+ @ 25°C.
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type