Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Features
- Low Tg
- Hydrophobic
- Flexible
- Low yellowing
- Broad adhesion to glass, metals, and plastics
Applications & Uses
- Markets
- Applications
- Cure Method
- Base Chemicals End Uses
- Coating Type
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.1 | g/cm3 | — |
| Durometer Hardness | 70A | — | — |
| Elongation at Break | 230 | % | — |
| Nominal Viscosity (at 60°C) | 22000 | cP | — |
| Nominal Viscosity (at 25°C) | 29000 | cP | — |
| Refractive Index (at 25°C) | 148 | — | — |
| Tensile at Break | 6 | MPa | — |
| Glass Transition Temperature (DMA) | -0.15 | °C | — |
| Viscosity (at 60°C) | 22000 | cP | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Applications
- Low modulus hydrophobic formulations
- Provides moisture and heat resistance
- Flexible
- Non yellowing
- Low water absorption
- Alkaline resistance
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 900 1,600 2,800 1,300 1,600 400 Elongation, %** 230 170 2.9 11.3 54 120 Elastic Modulus, ksi* 2.9 25 120 35 50 1 Durometer Hardness 70A 45D 76D 56D 61D 59A Water Absorption, % (24 hrs) 0.44 0.32 0.56 0.82 0.5 3 MEK Double Rubs (#) 47 11 >200 35 38 5 Tg(DMA)=-1°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Typical Formulations
Substrate I30 I50 TM50 TP50 H50 HE30 ABS ** *** * ** * Aluminum * Cold Rolled Steel
** * Glass * * HDPE * PET ** *** *** * *** * PMMA ** *** * *** * Polycarbonate * *** *** *** * Polypropylene * PVC ** *** * ** *** * Stainless Steel * * * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
Test Formulation Name 130 160 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 29,000 4,000 18,000 4,200 2,000 12,000 * Brookfield – CAP 2000+ @ 25°C.
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type